Features: • Single 5 V Power Supply
• Typical Power Dissipation of 23 mW, PowerDown of 0.01 mW
• FullyDifferential Analog Circuit Design for Lowest Noise
• Transmit BandPass and Receive LowPass Filters OnChip
• Active RC PreFiltering and PostFiltering
• MuLaw and ALaw Companding by Pin Selection
• OnChip Precision Reference Voltage (1.575 V)
• PushPull 300 W Power Drivers with External Gain Adjust
• MC145536EVK is the Evaluation Kit that Also Includes the MC145532 ADPCM TranscoderPinout
Specifications
| Symbol |
Parameter |
Value |
Unit |
| VDD |
DC Supply Voltage (Referenced to GND) |
0.5 to + 18 |
V |
| |
Voltage on Any Analog Input or Output Pin |
VSS 0.3 to VDD + 0.3 |
V |
| |
Voltage on Any Digital Input or Output Pin |
VSS 0.3 to VDD + 0.3 |
V |
| TA |
Operating Temperature Range |
55 to + 125 |
°C |
| Tstg |
Storage Temperature Range |
65 to + 150
|
°C |
DescriptionThe MC145480 is a general purpose per channel PCM CodecFilter with pin selectable MuLaw or ALaw companding, and is offered in 20pin DIP, SOG, and SSOP packages. MC145480 performs the voice digitization and reconstruction as well as the band limiting and smoothing required for PCM systems. This device is designed to operate in both synchronous and asynchronous applications and contains an onchip precision reference voltage.
MC145480 has an input operational amplifier whose output is the input to the encoder section. The encoder section immediately lowpass filters the analog signal with an active RC filter to eliminate very high frequency noise from being modulated down to the passband by the switched capacitor filter. From the active RC filter, the analog signal is converted to a differential signal. From this point, all analog signal processing is done differentially. MC145480 allows processing of an analog signal that is twice the amplitude allowed by a singleended design, which reduces the significance of noise to both the inverted and noninverted signal paths. Another advantage of this differential design is that noise injected via the power supplies is a commonmode signal that is cancelled when the inverted and noninverted signals are recombined. MC145480 dramatically improves the power supply rejection ratio.
After the differential converter, a differential switched capacitor filter band passes the analog signal from 200 Hz to 3400 Hz before the signal is digitized by the differential compressing A/D converter.
The MC145480 accepts PCM data and expands it using a differential D/A converter. The output of the D/A is lowpass filtered at 3400 Hz and sinX/X compensated by a differential switched capacitor filter. The signal is then filtered by an active RC filter to eliminate the outofband energy of the switched capacitor filter.
The MC145480 PCM CodecFilter accepts a variety of clock formats, including Short Frame Sync, Long Frame Sync, IDL, and GCI timing environments. This device also maintains compatibility with Motorola's family of Telecommunication products, including the MC14LC5472 UInterface Transceiver, MC145474/75 S/TInterface Transceiver, MC145532 ADPCM Transcoder, MC145422/26 UDLT1, MC145421/25 UDLT2, and MC3419/MC33120 SLIC.
The MC145480 PCM CodecFilter utilizes CMOS due to its reliable lowpower performance and proven capability for complex analog/digital VLSI functions.
MC145480 Data Sheet
