MC14516B

* Maximum Ratings are those values beyond which damage to the device may occur.

†Temperature Derating: Plastic "P and D/DW" Packages: 7.0 mW/ From 65To 125 Ceramic "L" Packages: 12 mW/From 100 To 125

The MC14516B synchronous up/down binary counter is constructed with MOS Pchannel and Nchannel enhancement mode devices in a monolithic structure.

This counter MC14516B can be preset by applying the desired value, in binary, to the Preset inputs (P0, P1, P2, P3) and then bringing the Preset Enable (PE) high. The direction of counting is controlled by applying a high (for up counting) or a low (for down counting) to the UP/DOWN input. The state of the counter changes on the positive transition of the clock input.

Cascading MC14516B can be accomplished by connecting the Carry Out to the Carry In of the next stage while clocking each counter in parallel. The outputs of MC14516B (Q0, Q1, Q2, Q3) can be reset to a low state by applying a high to the reset (R) pin.
This CMOS counter finds primary use in up/down and difference counting.

Other applications of MC14516B include: (1) Frequency synthesizer applications where low power dissipation and/or high noise immunity is desired, (2) Analogto digital and digitaltoanalog conversions, and (3) Magnitude and sign generation.
• Diode Protection on All Inputs
• Supply Voltage Range = 3.0 Vdc to 18 Vdc
• Internally Synchronous for High Speed
• Logic EdgeClocked Design - Count Occurs on Positive Going Edge of Clock
• Single Pin Reset
• Asynchronous Preset Enable Operation
• Capable of Driving Two LowPower TTL Loads or One LowPower Schottky Load Over the Rated Temperature Range