MC13192SARDUD

• Provides all hardware required for a complete 2.4 GHz wireless node using IEEE 802.15.4 packet structure.
• One MC13192 2.4 GHz transceiver RF reference design with printed circuit antenna.
• One MC9S08GT60 low-power, low-voltage MCU with 60KB of on-chip Flash.
• Background Debug Module (BDM) programming port for support of Metrowerks CodeWarrior™Development Studio.
• Provides IEEE 802.15.4 modem.
• Two Accelerometers: MMA6261Q (X and Y axis), MMA1260D (Z axis)
• RS-232 port for interface with a personal computer.
• Four switches and LEDs for control and monitoring.
• Reset switch for program reset.
• Scalable software support:
- Proprietary point-to-point or star networking using Freescale's Simple Medium Access Control (SMAC) software
- IEEE 802.15.4 Standard compliant networking using Freescale's MAC/PHY
- ZigBee™ networking using Freescale's Z-stack software

As previously stated, the MC13192 Sensor Applications Reference Design (SARD) provides the hardware required to establish a wireless node using a variety of protocols. Figure 1-1 shows a simplified block diagram of two SARDs connected in a simple point-to-point network. Optional personal computers of MC13192 are shown for control and monitoring.

The SARD MC13192 is a 2 inch x 3 inch module that comprises a complete network node containing the MC13192,crystal, printed circuit antenna and MCU. Also included are jumper-selectable X-Y and Z Axis Accelerometers, four switches, and four LEDs for monitoring purposes. The SARD derives MC13192's power from a 9V battery or a 2.1 mm power connector which allows a supply of 5.5 to 9V.