MC10H606

Features:

•Differential 50ΩECL Outputs
•Choice Between Differential PECL or TTL Clock Input
•Single Power Supply
•Multiple Power and Ground Pins to Minimize Noise


Pinout




Specifications

10H PECL DC CHARACTERISTICS (VCCT= VCCE= 5.0V ±5%)
Symbol	Characteristic	TA= 0°C		TA= 25°C		TA= 85°C		Unit	Condition
		Min	Max	Min	Max	Min	Max
IINH	Input HIGH Current		255		145		145	µA
IINL	Input LOW Current		0.5		0.5		0.5	µA
VIH	Input HIGH Voltage (Note 1.)	3830	4160	3870	4190	3930	4280	mV	VCCT= 5.0V
VIL	Input LOW Voltage (Note 1.)	3050	3520	3050	3520	3050	3555	mV	VCCT= 5.0V
VOH	Output HIGH Voltage (Note 1.)	3980	4160	4020	4190	4080	4270	mV	VCCT= 5.0V
VOL	Output LOW Voltage (Note 1.)	3050	3370	3050	3370	3050	3400	mV	VCCT= 5.0V
VBB	Output Bias Voltage (Note 1.)	3600	3710	3630	3730	3670	3790	mV	VCCT= 5.0V

Description

  The MC10/100H606 is a 6bit, registered, single supply TTL to PECL translator. The MC10/100H606 features differential PECL outputs as well as a choice between either a differential PECL clock input or a TTL clock input. The asynchronous master reset control is a PECL level input.

   With its differential PECL outputs and TTL inputs the MC10/100H606 device is ideally suited for the transmit function of a HPPI bus type boardtoboard interface application. The on chip registers simplify the task of synchronizing  the data between the two boards.

   The MC10/100H606 is available in either ECL standard: the MECL10H device is compatible with MECL 10KH logic levels, with a VCC of +5 volts; while the 100H device is compatible with 100K logic levels, with a VCC of +5 volts.