MC100EP116

The MC100EP116 is a type of 6-bit differential line receiver, which is based on the EP16 device. The 3.0GHz bandwid th offered by the high frequency outputs makes the device suitable for buffering of very high speed oscillators. A VBB pin is available to AC couple an input signal to the device. More information on AC coupling is able to be found in the design handbook interfacing with ECLinPS on our website. The design incorporates two stages of gain, internal to the device, making it an excellent option for utilize in high bandwidth amplifier applications

Features of MC100EP116 are: (1)230ps typical propagation delay; (2)high bandwidth to 3.0 GHz typical; (3)PECL mo de: 3.0V to 5.5V VCC with VEE = 0V; (4)ECL mode: 0V VCC with VEE =-3.0V to-5.5V; (5)internal input resistors: pull down on D, pulldown and pullup on D; (6)Q output will default low with inputs open or at VEE; (7)ESD protection: 2K V HBM, 100V MM; (8)VBB output; (9)new differential input common mode range; (10)moisture sensitivity level 2 for additional information, see application note and8003/D, etc.

The absolute maximum ratings of the MC100EP116 can be summarized as:(1)power supply (VCC=0V):6.0V to 0V, power supply (VEE=0V) 6.0V to 0V; (2)Input voltage(VCC = 0V, VI not more negative than VEE) :6.0V to 0V,Input voltage (VEE=0V, VI not more positive than VCC) 6.0V to 0V; (3)output current(continuous): 50mA; (4)VBB sink/ sour ce current:±0.5mA; (5)operating temperature range:40°C to +85°C; (6)storage temperature65°C to +150°C; (7)thermal resistance (junctiontoambient, still air): 80°C/W; (8)thermal resistance (junctiontocase): 12°C/W to 17°C/W; (9)solder temperature(<2 to 3 seconds: 245°C desired): 265°C.