Features: 184 edge connector pads with 1mm pad spacing 256 MB Direct RDRAM storage (C)Each RDRAM has 32 banks, for 256 banks total on module Gold plated contacts RDRAMs use Chip Scale Package (CSP) Serial Presence Detect support Operates from a 2.5 V supply Powerdown self refresh modes Separate Ro...
MC-4R256FKE8D-840: Features: 184 edge connector pads with 1mm pad spacing 256 MB Direct RDRAM storage (C)Each RDRAM has 32 banks, for 256 banks total on module Gold plated contacts RDRAMs use Chip Scale Package (CSP) ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol |
Parameter |
MIN. |
MAX. |
Unit |
VI,ABS | Voltage applied to any RSL or CMOS signal pad with respect to GND | -0.3 VDD | + 0.3 | V |
VDD,ABS | Voltage on VDD with respect to GND | -0.5 VDD | + 1.0 | V |
TSTORE | Storage temperature | -50 | +100 | °C |
The Direct Rambus RIMM MC-4R256FKE8D module is a general-purpose high-performance memory module subsystem suitable for use in a broad range of applications including computer memory, personal computers, workstations, and other applications MC-4R256FKE8D where high bandwidth and low latency are required.
MC-4R256FKE8D modules consists of eight 288M Direct Rambus DRAM (Direct RDRAM) devices (PD488588). These are extremely high-speed CMOS DRAMs organized as 16M words by 18 bits. The use of Rambus Signaling Level (RSL) technology permits 600MHz, 711MHz or 800MHz transfer rates while using conventional system and board design technologies.
Direct RDRAM MC-4R256FKE8D are capable of sustained data transfers at 1.25 ns per two bytes (10 ns per sixteen bytes). The architecture of the Direct RDRAM enables the highest sustained bandwidth for multiple, simultaneous, randomly addressed memory transactions. The separate control and data buses with independent row and column control yield over 95 % bus efficiency. The Direct RDRAM's MC-4R256FKE8D 32 banks support up to four simultaneous transactions per device.