Recovery Time
:
Maximum Power Dissipation
:
Mounting Style
: Through Hole
Product
: Schottky Rectifiers
Packaging
: Tube
Forward Continuous Current
: 20 A
Package / Case
: ITO-220AB
Peak Reverse Voltage
: 200 V
Operating Temperature Range
: - 65 C to + 175 C
Configuration
: Dual Common Cathode
Max Surge Current
: 150 A
Maximum Reverse Leakage Current
: 5 uA
Forward Voltage Drop
: 0.97 V
Features: • Plastic package has Underwriters LaboratoryFlammability Classification 94V-0
• Dual rectifier construction, positive center tap
• Metal silicon junction, majority carrier conduction
• Low leakage current, Low power loss, High efficiency
• Guardring for overvoltage protection
• For use in high frequency switching power supplies and converters with up to 48V output, free wheeling, andpolarity protectio applications
• Rated for reverse surge and ESDSpecifications
| Maximum Ratings (TC= 25°C unless otherwise noted) |
Parameter
|
Symbol |
MBR20H200CT |
MBRF20H200CT |
MBRB20H200CT-1 |
Unit |
|
Maximum repetitive peak reverse voltage
|
VRRM |
200 |
V |
| Working peak reverse voltage |
VRWM |
200 |
V |
| Maximum DC blocking voltage |
VDC |
200 |
V |
Maximum average forward rectified current Total device
(Fig. 1) Per leg |
IF(AV) |
20
10 |
A |
|
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) per leg |
IFSM |
290 |
A |
|
Peak repetitive reverse current per leg at tp= 2µs, 1KHZ
|
IRRM |
1.0 |
A |
Peak non-repetitive reverse surge energy
(8/20µs waveform) |
ERSM |
20 |
mJ |
|
Non-repetitive avalanche energy per leg
at 25°C, EAS= 2.0A, L=10mH
|
EAS |
20 |
mJ |
Electrostatic discharge capacitor voltage
Human body model: C = 100pF, R = 1.5KΩ
|
VC |
25 |
KV |
Voltage rate of change (rated VR)
|
dv/dt |
10,000 |
V/µs |
|
Operating junction and storage temperature range
|
TJ, TSTG |
65 to +175 |
°C |
RMS Isolation voltage (MBRF type only) from terminals
to heatsink with t = 1 second, RH 30%
|
VISOL |
4500(1)
3500(2)
1500 (3) |
V |
| Electrical Characteristics(TC= 25°C unless otherwise noted) |
Parameter
|
Symbol |
Typical |
Maximum |
Unit |
|
Maximum instantaneous IF = 10A,Tj = 25°C
forward voltage per leg at:IF = 10A,Tj = 125°C
IF = 20A,Tj = 25°C
IF = 20A,Tj = 125°C |
VF |
0.81
0.65
0.87
0.74
|
0.88
0.75
0.97
0.85 |
V |
|
Maximum reverse current per leg TJ = 25°C
at working peak reverse voltage(4)TJ = 125°C
|
IR |
5.0
1.0 |
µA
mA |
| Typical junction capacitance at 4.0V, 1MHZ |
CJ |
250 |
pF |
| Typical junction capacitance at 4.0V, 1MHZCJ250pF |
| Parameter |
Symbol |
MBR |
MBRF |
MBRB |
Unit |
|
Typical thermal resistance per leg
|
RJC |
2.0 |
4.0 |
2.0 |
°C/W |
DescriptionMBR20H200CT, MBRF20H200CT & SB20H200CT-1 datasheet
MBRF20H200CT Data Sheet
