MBR7H35

Description

MBR7H35's Mechanical Data are listed as follows:its Case is JEDEC TO-220AC, ITO-220AC & TO-263AB molded plastic body, its Terminals is Plated leads, solderable per MIL-STD-750 and Method 2026, its Polarity is as marked, its Mounting Position is any, its Mounting Torque is 10 in-lbs maximum, its Weight is 0.08oz., 2.24g.
MBR7H35's Features are listed as follows: the Plastic package has Underwriters Laboratory Flammability Classification 94 V-0, it is the Metal silicon junction, majority carrier conduction, it has Low forward voltage drop, low power loss and high efficiency,it is Guardring for overvoltage protection, it is For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications, it is High temperature soldering guaranteed:250 °C/10 seconds, 0.25" (6.35 mm) from case, it is Rated for reverse surge and ESD, its maximum operation junction temperature is 175 °C.
Here are its Maximun Ratings: Maximum repetitive peak reverse voltage in the MBR7H35 is 35V, in the MBR7H45 is 45V, in the MBR7H50 is 50V and in the MBR7H60 is 60V; Working peak reverse voltage in the MBR7H35 is 35V, in the MBR7H45 is 45V, in the MBR7H50 is 50V and in the MBR7H60 is 60V; Maximum DC blocking voltage in the MBR7H35 is 35V, in the MBR7H45 is 45V, in the MBR7H50 is 50V and in the MBR7H60 is 60V; Max.average forward rectified current (see fig. 1) is 7.5A; Peak repetitive forward current at TC = 155 °C (rated VR, 20 KHz sq. wave) is 15A; Non-repetitive avalanche energy at 25 °C, IAS = 4 A, L = 10 mH is 80mJ; Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) is 150A; Peak repetitive reverse surge current at tp = 2.0s, 1 KHZ in the MBR7H35 and in the MBR7H45 is 1.0A, in the MBR7H50 and in the MBR7H60 is 0.5A; Peak non-repetitive reverse energy (8/20s waveform) in the MBR7H35 and in the MBR7H45 is 20mJ, in the MBR7H50 and in the MBR7H60 is10mJ; Electrostatic discharge capacitor voltage VC 25 kV Human body model: C = 100 pF, R = 1.5 k is 25KV; Voltage rate of change (rated VR) is 10000 V/s; Operating junction temperature range and Storage temperature range is 65 to +175°C; RMS Isolation voltage (MBRF type only) from terminals to heatsink with t = 1.0 second, RH30% is 4500 V where lead does not overlap heatsink with 0.110" offset, 3500V where leads do overlap heatsink 1500V where washer diameter is 4.9 mm (0.19").