MB98C81013(1MB)

*1. Permanent device damage may occur if the above Absolute Maximum Ratings are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

The Fujitsu MB98C81013(1MB) Flash Miniature cards conform to "Miniature Card Specification" pubulished by MCIF; Miniature Card Implementers Forum.

The Fujitsu MB98C81013(1MB) Flash Miniature cards are small form factor Flash memory cards targeted various markets; digital photography, audio recording, hand held PCs and other small portable equipments. Miniature cards' high performance, small size (38 mm*33 mm*3.5 mm), low cost and simple interface are ideal for portable applications that requirehigh speed flash disk drives or eXecute In Place (XIP).

The MB98C81013(1MB) are 5 V-only operational and allow the users to use as*8 or*16 organization on low powerat high speed.

• Small size : 33.0 mm (length)*38.0 mm (width)*3.5 mm (thickness)
• +5 V±5% power supply program and erase
• Command control for Automated Program/Automated Erase operation
• Erase Suspend Read/Program Capability (Only Erase Suspend Read is possible for MB98C81013)
• 128 KB Sector Erase (at*16 mode)
• Any Combination of Sectors Erase and Full Chip Erase
• Detection of completion of program/erase operation with Data# Polling or Toggle bit.
• Ready/Busy Output with BUSY# (Except for MB98C81013)
• Reset Function with RESET# pin (Except for MB98C81013)
• Write protect function with WP switch
• Low VCC Write Inhibit
• AIS (Attribute Information Structure) is available from the address "0000H" of Lower Byte.