MB84VB2000-10

Features: • Contain 2 chips of MBM29LV800A, and each chip have separate CE.• Power supply voltage of 2.7 to 3.6 V• High performance 100 ns maximum access time• Operating Temperature 40 to +85°C• Minimum 100,000 write/erase cycles• Sector erase architecture One 1...

product image

MB84VB2000-10 Picture
SeekIC No. : 004413496 Detail

MB84VB2000-10: Features: • Contain 2 chips of MBM29LV800A, and each chip have separate CE.• Power supply voltage of 2.7 to 3.6 V• High performance 100 ns maximum access time• Operating Temp...

floor Price/Ceiling Price

Part Number:
MB84VB2000-10
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/27

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Contain 2 chips of MBM29LV800A, and each chip have separate CE.
• Power supply voltage of 2.7 to 3.6 V
• High performance
   100 ns maximum access time
• Operating Temperature
   40 to +85°C
• Minimum 100,000 write/erase cycles
• Sector erase architecture
   One 16 K byte, two 8 K bytes, one 32 K byte, and fifteen 64 K bytes ´ 2 chips
   Any combination of sectors can be concurrently erased. Also supports full chip erase.
• Boot Code Sector Architecture
   MB84VB2000: Top sector
   MB84VB2001: Bottom sector
• Embedded EraseTM Algorithms
   Automatically pre-programs and erases the chip or any sector
• Embedded ProgramTM Algorithms
   Automatically writes and verifies data at specified address
• Data Polling and Toggle Bit feature for detection of program or erase cycle completion
• Ready/Busy output (RY/BY)
   Hardware method for detection of program or erase cycle completion
• Automatic sleep mode
   When addresses remain stable, automatically switch themselves to low power mode.
• Low VCC write inhibit 2.5 V
• Erase Suspend/Resume
   Suspends the erase operation to allow a read data in another sector within the same device
• Please refer to "MBM29LV800TA/BA" data sheet in detailed function



Specifications

Storage Temperature ..................................................................................................55°C to +125°C
Ambient Temperature with Power Applied ..................................................................25°C to +85°C
Voltage with Respect to Ground All pins (Note) ..........................................................0.3 V to VCC + 0.5 V
VCCf/VCCs Supply (Note) ..............................................................................................0.3 V to +4.6 V
Note: Minimum DC voltage on input or I/O pins are 0.5 V. During voltage transitions, inputs may negative overshoot
         VSS to 2.0 V for periods of up to 20 ns. Maximum DC voltage on output and I/O pins are VCCf + 0.5 V or VCCs
         + 0.5 V. During voltage transitions, outputs may positive overshoot to VCC + 2.0 V for periods of up to 20 ns.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
                  temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.



Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
LED Products
Crystals and Oscillators
Circuit Protection
Optical Inspection Equipment
Cables, Wires
Undefined Category
View more