MAX9693

1.2ns Propagation Delay
100ps Propagation Delay Skew
150ps Dispersion
0.5ns Latch Setup Time
0.5ns Latch-Enable Pulse Width
Available in MAX and QSOP Packages
+5V, -5.2V Power Supplies

High-Speed Line Receivers Peak Detectors Threshold Detectors High-Speed Triggers

Supply Voltage (VCC) .......................................................................-0.3V to +6V
Supply Voltage (VEE).........................................................................-6V to +0.3V
Input Voltage............................................................(VCC + 0.3V) to (VEE - 0.3V)
Output Short-Circuit Duration ............................................................Continuous
Differential Input Voltage .............................................................................±5V
Latch Enable ......................................................................(VEE - 0.3V) to +0.3V
Output Current ...........................................................................................50mA
Input Current ...........................................................................................±25mA
Continuous Power Dissipation (TA = +70°C)
8-Pin MAX (derate 4.1mW/°C above 70°C)...........................................330mW
8-Pin SO (derate 5.88mW/°C above +70°C) ..........................................471mW
8-Pin PDIP (derate 10.53mW/°C above +70°C)......................................842mW
10-Pin MAX (derate 5.6mW/°C above +70°C).......................................444mW
16-Pin QSOP (derate 8.3mW/°C above +70°C) ......................................667mW
16-Pin SO (derate 8.7mW/°C above +70°C) ...........................................696mW
16-Pin PDIP (derate 9.09mW/°C above +70°C) ......................................727mW
Operating Temperature Range ...................................................-40°C to +85°C
Junction Temperature................................................................................+150°C
Storage Temperature Range .....................................................-55°C to +150°C
Lead Temperature (soldering, 10s) ...........................................................+300°C

The MAX9691/MAX9692/MAX9693 are ultra-fast ECL comparators capable of very short propagation delays. Their design maintains the excellent DC matching characteristics normally found only in slower comparators.

The MAX9691/MAX9692/MAX9693 have differential inputs and complementary outputs that are fully compatible with ECL-logic levels. Output current levels are capable of driving 50 terminated transmission lines. The ultra-fast operation makes signal processing possible at frequencies in excess of 600MHz.

The MAX9692/MAX9693 feature a latch-enable (LE) function that allows the comparator to be used in a sample-hold mode. When LE is ECL high, the comparator functions normally. When LE is driven ECL low, the outputs are forced to an unambiguous ECL-logic state, dependent on the input conditions at the time of the latch input transition. If the latch-enable function is not used on either of the two comparators, the appropriate LE input of MAX9693 must be connected to ground; the companion LE input must be connected to a high ECL logic level.

These MAX9693 are available in SO, QSOP, and tiny MAX packages for added space savings.