DescriptionThe MAX9680 is available in the tiny 2mm x 2.1mm, 6-pin, SC70 package. The MAX9680 high-speed amplifier and filter is optimized for portable video applications. The MAX9680 has been optimized for space-sensitive applications by integrating internal gain setting resistors (G = 5.2V/V)and...
MAX9680: DescriptionThe MAX9680 is available in the tiny 2mm x 2.1mm, 6-pin, SC70 package. The MAX9680 high-speed amplifier and filter is optimized for portable video applications. The MAX9680 has been optim...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.34 - 1.34 / Piece
High Speed Operational Amplifiers Op Amp Comparator Reference IC
US $1.6 - 3.31 / Piece
Operational Amplifiers - Op Amps Op Amp Comparator Reference IC
The MAX9680 is available in the tiny 2mm x 2.1mm, 6-pin, SC70 package. The MAX9680 high-speed amplifier and filter is optimized for portable video applications. The MAX9680 has been optimized for space-sensitive applications by integrating internal gain setting resistors (G = 5.2V/V)and a 2-pole video-DAC reconstruction filter. The output swings within 2mV of GND and 20mV to VDD with a standard back-terminated video load (150I). An internal level shift circuit prevents the output from saturating with 0V input, thus preventing sync-pulse clipping in common video circuits. Therefore, the MAX9680 is ideally suited for DC-coupling to the video load. In shutdown mode, the quiescent current is reduced to less than 0.4FA, dramatically reducing power consumption and prolonging battery life. It is specifically designed to be compatible with the video encoders embedded in application processors with 0.4VP-P video output. The input common-mode range includes GND, which allows a video DAC (digital-to-analog converter)to be DC-coupled to the MAX9680.
The features of MAX9680 can be summarized as (1)5.2V/V internal gain; (2)2-pole reconstruction filter; (3)s input range includes ground; (4)DC-coupled inputs and outputs; (5)s rail-to-rail output; (6)3.7mA low quiescent current; (7)0.4A shutdown current.
The absolute maximum ratings of MAX9680 are (1)supply voltage: (VDD to GND): -0.3V to +4V; (2)ENABLE to GND: -0.3V to +4V; (3)IN to GND: -0.3V to (VDD + 0.3V); (4)OUT to GND (ENABLE is high): -0.3V to (VDD + 0.3V); (5)OUT to GND (ENABLE is low): -0.3V to +3.2V; (6)ENABLE, IN: Q50mA; (7)OUT: continuous; (8)electrostatic discharge human body model: 2000V/ Charged Device Model: 500V; (9)thermal limits (Note 1)multiple-layer PCB continuous power dissipation (TA = +70°C)6-Pin SC70 (derate 3.1mW/C above +70°C): 245mW/ 6-Pin SC70 BJA: 326.5°C/W/ 6-Pin SC70 BJC: 115°C/W; (10)operating temperature range: -40°C to +125°C; (11)junction temperature: +150°C; (12)storage temperature range: -65°C to +150°C; (13)lead temperature (soldering, 10s): +300°C.