MAX9509

The MAX9509/ MAX9510 also feature a transparent input sync-tip clamp, allowing AC-coupling of input signals with different DC biases. The MAX9509/MAX9510 have an internal fixed gain of 8. The input full-scale video signal is nominally 0.25VP-P, and the output full-scale video signal is nominally 2VP-P. The MAX9509 is offered in an 8-pin TDFN package and the Operating from a 1.8V single power supply, the MAX9509/ MAX9510 amplify standard-definition video signals and only consume 5.8mW quiescent power and 11.7mW average power. The MAX9509/MAX9510 leverage Maxim's DirectDrivetechnology to generate a clean, internal negative supply. The MAX9509/MAX9510 are designed to operate from the 1.8V digital power supply. The high power-supply rejection ratio (49dB at 100kHz)allows the MAX9509/ MAX9510 to reject the noise from the digital power supply. The MAX9509 features an internal reconstruction filter that smoothes the steps and reduces the spikes on the video signal from the video digital-to-analog converter (DAC). The reconstruction filter typically has ±1dB passband flatness of 8.1MHz and 46dB attenuation at 27MHz. The large-signal, ±1dB passband flatness of the MAX9510 video amplifier is typically 8.4MHz, and the large signal -3dB frequency is typically 11.4MHz. The input of the MAX9509/MAX9510 can be directly connected to the output of a video DAC. The devices operate from a 1.8V or 2.5V single supply and feature a 10nA low-power shutdown mode. Combining the internal negative power supply with the external positive 1.8V supply, the MAX9509/MAX9510 are able to drive a 2VP-P video signal into a 150load. Besides increasing the output voltage range, Maxim's DirectDrive technology eliminates large output-coupling capacitors and sets the output video black level near ground. DirectDrive requires an integrated charge pump and an internal linear regulator to create a clean negative power supply so that the amplifier can pull the sync below ground. The charge pump injects little noise into the video output, making the picture visibly flawless.

The features of MAX9509 can be summarized as (1)5.8mW quiescent power consumption; (2)11.7mW average power consumption; (3)1.8V or 2.5V single-supply operation; (4)reconstruction filter with 8.1MHz passband and 46dB Attenuation at 27MHz (MAX9509); (5)directdrive sets video output black level near ground; (6)DC-coupled input/output; (7)transparent input sync-tip clamp; (8)internal fixed gain of 8; (9)10nA shutdown supply current.

The absolute maximum ratings of MAX9509 are (1)VDD: -0.3V to +3V; (2)IN:-0.3V to (VDD + 0.3V); (3)OUT: (The greater of VSS and -1V)to (VDD + 0.3V); (4)SHDN:-0.3V to +4V; (5)C1P: -0.3V to (VDD + 0.3V); (6)C1N: (VSS - 0.3V)to +0.3V; (7)VSS: -3V to +0.3V; (8)duration of OUT Short Circuit to VDD, GND, and VSS: Continuous; (9)continuous current IN, SHDN: ±20mA; (10)continuous power dissipation (TA = +70°C)8-Pin TDFN (derate 11.9mW/°C above +70°C): 953.5mW/ 8-Pin MAX (derate 4.5mW/°C above +70°C): 362mW; (11)operating temperature range: -40°C to +125°C; (12)junction temperature: +150°C; (13)storage temperature range: -65°C to +150°C; (14)lead temperature (soldering, 10s): +300°C.