MAX913

Ultra Fast (10ns)
Single +5V or Dual ±5V Supply Operation
Input Range Extends Below Negative Supply
Low Power: 6mA (+5V) Per Comparator
No Minimum Input Signal Slew-Rate Requirement
No Power-Supply Current Spiking
Stable in the Linear Region
Inputs Can Exceed Either Supply
Low Offset Voltage: 0.8mV

Zero-Crossing Detectors Ethernet Line Receivers Switching Regulators High-Speed Sampling Circuits High-Speed Triggers Extended Range V/F Converters Fast Pulse Width/Height Discriminators

Positive Supply Voltage.............................................................................7V
Negative Supply Voltage .........................................................................-7V
Differential Input Voltage ....................................................................±15V
Input Voltage (Referred to V-)..................................................- 0.3V to 15V
Latch Pin Voltage ..............................................................Equal to Supplies
Continuous Output Current...............................................................±20mA
Continuous Power Dissipation (TA = +70°C)
8-Pin Plastic DIP (derate 9.09mW/°C above +70°C) ......................727mW
8-Pin SO (derate 5.88mW/°C above +70°C)...................................471mW
8-Pin CERDIP (derate 8.00mW/°C above +70°C)............................640mW
16-Pin Plastic DIP (derate 10.53mW/°C above +70°C)...................842mW
16-Pin Narrow SO (derate 8.70mW/°C above +70°C) ....................696mW
16-Pin CERDIP (derate 10.00mW/°C above +70°C)........................800mW
Operating Temperature Ranges:
MAX91_ C_ _ .........................................................................0°C to +70°C
MAX91_ E_ _........................................................................-40°C to +85°C
MAX91_ MJ_ ......................................................................-55°C to +125°C
Storage Temperature Range .............................................-65°C to +150°C
Lead Temperature (soldering, 10sec) ...............................................+300°C

The MAX913 single and MAX912 dual high-speed, low-power comparators have differential inputs and complementary TTL outputs. Fast propagation delay (10ns typ), extremely low supply current, and a wide common-mode input range that includes the negative rail make the MAX912/MAX913 ideal for low-power, high-speed, single +5V (or ±5V) applications such as V/F converters or switching regulators.

The MAX912/MAX913 outputs remain stable through the linear region. This feature eliminates output instability common to high-speed comparators when driven with a slow-moving input signal.

The MAX912/MAX913 can be powered from a single +5V supply or a ±5V split supply. The MAX913 is an improved plug-in replacement for the LT1016. It provides significantly wider input voltage range and equivalent speed at a fraction of the power. The MAX912 dual comparator has equal performance to the MAX913 and includes independent latch controls.