MAX895L

IN to GND ..............................................................-0.3V to 6V
ONA, ONB to GND...................................................-0.3V to 6V
SET A, SET B, OUT A, OUT B to GND ........-0.3V to (VIN + 0.3V)
Maximum Continuous Switch Current
MAX894L ........................................................................0.75A
MAX895L ......................................................................0.375A
Continuous Power Dissipation (TA = +70°C)
SO (derate 5.88mW/°C above +70°C) ......................471mW
Operating Temperature Range
MAX89_LESA .................................................-40°C to +85°C
Storage Temperature Range.........................-65°C to+150°C
Lead Temperature (soldering, 10sec) .........................+300°C

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

The MAX894L/MAX895L smart, dual, low-voltage, P-channel, MOSFET power switches are intended for high-side load-switching applications. These switches operate with inputs from +2.7V to +5.5V, making them ideal for both 3V and 5V systems. Internal currentlimiting circuitry of MAX895L protects the input supply against overload. Thermal-overload protection limits power dissipation and junction temperature.

The MAX894L/MAX895L's maximum current limits are 500mA and 250mA, respectively. The current limit through the switches is programmed with resistors from SET A/SET B to ground. When the switches are on, the quiescent supply current is a low 16A. When the switches MAX895L are off, the supply current decreases to 0.1A.


The MAX894L/MAX895L are available in an 8-pin SO package.