Features: Six (MAX6870) or Four (MAX6871) Configurable Input Voltage Detectors One High Voltage Input (+1.25V to +7.625V or +2.5V to +13.2V Thresholds) One Bipolar Voltage Input (±1.25V to ±7.625V or ±2.5V to ±15.25V Thresholds) Four (MAX6870) or Two (MAX6871) Positive Voltage Inputs (+0.5V to +...
MAX6870: Features: Six (MAX6870) or Four (MAX6871) Configurable Input Voltage Detectors One High Voltage Input (+1.25V to +7.625V or +2.5V to +13.2V Thresholds) One Bipolar Voltage Input (±1.25V to ±7.625V ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.38 - .53 / Piece
Voltage & Current References Low-Power Low-Drop Voltage Ref
Six (MAX6870) or Four (MAX6871) Configurable Input Voltage Detectors
One High Voltage Input (+1.25V to +7.625V or +2.5V to +13.2V Thresholds)
One Bipolar Voltage Input (±1.25V to ±7.625V or ±2.5V to ±15.25V Thresholds)
Four (MAX6870) or Two (MAX6871) Positive
Voltage Inputs (+0.5V to +3.05V or +1V to +5.5V Thresholds)
Four General-Purpose Logic Inputs
Two Configurable Watchdog Timers
Eight (MAX6870) or Five (MAX6871)
Programmable Outputs
Active-High, Active-Low, Open-Drain, Weak
Pullup, Push-Pull, Charge-Pump
Timing Delays from 25µs to 1600ms
10-Bit Internal ADC Monitors the Input Voltage
Detectors and Two Auxiliary Inputs
Margining Disable and Manual Reset Controls
Internal 1.25V Reference or External Reference Input
4kb Internal User EEPROM Endurance: 100,000 Erase/Write Cycles
Data Retention: 10 Years
I2C/SMBus-Compatible Serial
Configuration/Communication Interface
±1% Threshold Accuracy
The MAX6870/MAX6871 EEPROM-configurable, multi-voltage supply sequencers/supervisors monitor several voltage detector inputs, two auxiliary inputs, and fourgeneral-purpose logic inputs. The MAX6870/MAX6871 feature programmable outputs for highly configurable power-supply sequencing applications. The MAX6870 features six voltage detector inputs and eight program-mable outputs, while the MAX6871 features four voltage detector inputs and five programmable outputs. Manual reset and margin disable inputs offer additional flexibility.
All voltage detectors of MAX6870 offer two configurable thresholds for undervoltage/overvoltage or dual undervoltage detection. One high voltage input (IN1) provides detec-tor threshold voltages from +2.5V to +13.2V in 50mV increments, or from +1.25V to +7.625V in 25mV incre-ments. A bipolar input (IN2) provides detector threshold voltages from ±2.5V to ±15.25V in 50mV increments, or from ±1.25V to ±7.625V in 25mV increments. Positive inputs (IN3IN6) of MAX6870 provide detector threshold voltages from +1V to +5.5V in 20mV increments, or from +0.5V to +3.05V in 10mV increments. sequencing or system resets/interrupts. Programmable output options of MAX6870 include: active-high, active-low, opendrain, weak pullup, push-pull, and charge pump.Programmable timing delay blocks configure each output to wait between 25µs and 1600ms before deasserting. A fault register logs the condition that caused each output to asser(undervoltage, overvoltage, manual reset, etc.).
An internal 10-bit ADC of MAX6870 monitors the voltage detector inputs, and two auxiliary inputs through a multiplexer that automatically sequences through all inputs every 200ms. A SMBus TM/I2CTM-compatible, serial data inter-face programs and communicates with the configuration EEPROM, the configuration registers, the internal 4kbuser EEPROM, the ADC registers, and the fault registers of the MAX6870/MAX6871. The MAX6870/MAX6871 are available in a 7mm x 7mmx 0.8mm 32-pin thin QFN package and operate over