Features: 3*3 UCSP, 6-Pin SOT23, and 8-Pin QFN Packages
Preset +1.5V to +3.3V Output (100mV Increments)
SET Pin for Adjustable Output Voltage
75V RMS LDO Output Voltage Noise (MAX6477MAX6484)
±2.0% Accuracy Over Temperature
Guaranteed 300mA Output Current
Low Dropout Voltage 55mV at 150mA 114mV at 300mA
82A Supply Current, 0.1A Shutdown Current
Input Reverse Current, Thermal and Short-Circuit Protection
Microprocessor Reset with Four Timeout Options
Push-Pull or Open-Drain RESET
Manual Reset Input
Remote Feedback Sense
ApplicationHand-Held Instruments (PDAs, Palmtops)
PCMCIA Cards/USB Devices
Cellular/Cordless Telephones CD/DVD Drives
Notebook ComputersDigital Cameras
Bluetooth Modules/Wireless LANPinout
Specifications(All voltages referenced to GND, unless otherwise noted.)
Continuous Power Dissipation (TA = +70)
IN, SHDN, OUT, FB.........................................................-0.3V to +7V
3 x 3 UCSP (derate 10.5mW/ above +70) .................. ..840mW
MR, SET............................................................-0.3V to (VIN + 0.3V)
6-Pin SOT23 (derate 9.1mW/above +70).......................727mW
RESET (push-pull) .........................................-0.3V to (VOUT + 0.3V)
8-Pin Thin QFN
RESET (open drain).......................................................-0.3V to +7V
(derate 24.4mW/ above +70)......................................1951mW
OUT Short Circuit............................................................Continuous
Operating Temperature Range ...............................-40 to +85
Input/Output Current (all pins except IN and OUT).................20mA
Junction Temperature...........................................................+150
Storage Temperature Range..................................-65 to +150
Lead Temperature (soldering, 10s)......................................+300
DescriptionThe MAX6469MAX6484 are low-dropout linear regula-tors with a fully integrated microprocessor reset circuit.Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply current. The low supply current, low dropout volt-age, and integrated reset functionality make these MAX6469 ideal for battery-powered portable equipment.
The MAX6469MAX6484 include a reset output that indi-cates when the regulator output drops below standard microprocessor supply tolerances (-7.5% or -12.5% of nominal output voltage). This eliminates the need for an external microprocessor supervisor, while ensuring thatsupply voltages and clock oscillators have stabilized before processor activity is enabled. Push-pull and open-drain active-low reset outputs of MAX6469 are available, with reset timeout periods of 2.5ms, 20ms, 150ms, or 1200ms (min).
The MAX6469/MAX6470/MAX6473MAX6478/MAX6481MAX6484 also have a shutdown feature that reduces the supply current to 0.1µA (typ). The MAX6471MAX6474/MAX6479MAX6482 offer a manual reset input to assert a microprocessor reset while the regulator output is within specification. The MAX6475/MAX6476/MAX6483/MAX6484feature a remote feedback sense pin for use with an external NPN transistor for higher-current applica-tions. The MAX6469 are available in 6-pin SOT23 and 8-pin thin QFN packages. The MAX6477MAX6484 are available in a 3 *3 chip-scale package(UCSP™). All devices are specified for operation from -40°C to +85°C.3*3 UCSP, 6-Pin SOT23, and 8-Pin QFN Packages Preset +1.5V to +3.3V Output (100mV Increments) SET Pin for Adjustable Output Voltage75µVRMS LDO Output Voltage Noise(MAX6477MAX6484) ±2.0% Accuracy Over Temperature Guaranteed 300mA Output Current Low Dropout Voltage 55mV at 150mA 114mV at 300mA 82µA Supply Current, 0.1µA Shutdown Current Input Reverse Current, Thermal and Short-CircuitProtection Microprocessor Reset with Four Timeout Options Push-Pull or Open-Drain RESET Manual Reset Input Remote Feedback Sense
MAX6469 Data Sheet
