MAX6380

The MAX6375MAX6380 are ultra-low-power circuits used for monitoring battery, power-supply, and regulated system voltages. Each detector contains a precision bandgap reference, comparator, and internally trimmed resistors that set specified trip threshold voltages.

These MAX6380 provide excellent circuit reliability and low cost by eliminating external components and adjustments when monitoring nominal system voltages from 2.5V to 5V.

These MAX6380 perform a single function: they assert an output signal whenever the VCC supply voltage falls below a preset threshold. The devices are differentiated by their output logic configurations and preset threshold voltages. The MAX6375/MAX6378 (push-pull) and MAX6377/MAX6380 (open-drain) have an active-low output (OUT is logic low when V_CC is below VTH). The MAX6376/MAX6379 have an active-high push-pull output (OUT is logic high when V_CC is below VTH). All parts are guaranteed to be in the correct output logic state for V_CC down to 1V. The detector is designed to ignore fast transients on V_CC. The MAX6375/MAX6376/ MAX6377 have voltage thresholds between 2.20V and 3.08V in approximately 100mV increments. The MAX6378/MAX6379/MAX6380 have voltage thresholds between 3.30V and 4.63V in approximately 100mV increments.

Ultra-low supply current of 500nA (MAX6375/MAX6376/ MAX6377) makes these MAX6380 ideal for use in portable equipment. All six devices are available in space-saving SC70 packages.