MAX6326

Features:

 Ultra-Low 1µA (max) Supply Current
    (MAX6326/MAX6327/MAX6328)
 Precision Monitoring of 2.5V, 3V, 3.3V, and 5V
    Power-Supply Voltages
 Reset Thresholds Available from 2.2V to 4.63V
 Fully Specified Over Temperature
 100ms (min) Power-On Reset Pulse Width
 Low Cost
 Available in Three Versions: Push-Pull RESET,
    Push-Pull ,RESET, and Open-Drain ,RESET
 Power-Supply Transient Immunity
 No External Components
 3-Pin SC70/SOT23 Packages
 Pin Compatible with MAX803/MAX809/MAX810


Application

Computers                           Intelligent Instruments
Controllers                           Automotive
Critical µP and µC                Portable/Battery-Powered
Power Monitoring                 Equipment


Pinout




Specifications

Terminal Voltage (with respect to GND)
VCC...........................................................................-0.3V to +6V
RESET, ,RESET (push-pull) .........................-  0.3V to (VCC + 0.3V)
,RESET(open drain).................................................. -0.3V to +6V
Input Current (V_CC) ............................................................20mA
Output Current (RESET, ,RESET).........................................  20mA
Rate of Rise (V_CC) ...........................................................100V/µs
Continuous Power Dissipation (T_A = +70°C)
3-Pin SC70 (derate 2.7mW/°C above +70°C) ...............174mW
3-Pin SOT23 (derate 4mW/°C above +70°C)................ 320mW
Operating Temperature Range .........................-40°C to +85°C
Storage Temperature Range ..........................-65°C to +150°C
Lead Temperature (soldering, 10s) ................................+300°C


Description

The MAX6326/MAX6327/MAX6328/MAX6346/MAX6347/MAX6348 microprocessor (µP) supervisory circuits monitor the power supplies in µP and digital systems. The MAX6326 provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with 2.5V, 3V, 3.3V, and 5V powered circuits.

The MAX6326 perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for at least 100ms after VCC has risen above the reset threshold. The only difference between the devices is their output. The MAX6326/MAX6346 (push-pull) and MAX6328/MAX6348 (open-drain) have an active-low reset output. The MAX6327/MAX6347 have an active-high push-pull reset output. All of these parts are guaranteed to be in the correct state for VCC down to 1V. The reset comparator is designed to ignore fast transients on VCC. Reset thresholds are factory-trimmable between 2.2V and 4.63V, in approximately 100mV increments. Twenty-one standard versions are available. Contact the factory for availability of nonstandard versions.

Ultra-low supply currents (1µA max for the MAX6326/MAX6327/MAX6328) make these parts ideal for use in portable equipment. All six devices are available in space-saving SOT23 and SC70 packages.