MAX6107

Features:

Ultra-Small 3-Pin SOT23 Package
Low Cost
No Output Capacitor Required
Stable with Capacitive Loads
Load Regulation (2mA Sink): 8mV/mA (max)Load Regulation (5mA Source): 0.9mV/mA (max)
±0.4% (max) Initial Accuracy
Low 75ppm/°C Temperature  Coefficient
125A (max) Quiescent Supply Current
50mV Dropout at 1mA Load Current


Application

Portable Battery-Powered Systems
Notebook Computers
PDAs, GPSs, DMMs
Cellular Phones
Hard-Disk Drives


Specifications

(Voltages Referenced to GND)
IN .........................................................................-0.3V to +13.5V
OUT ..............................................................-0.3V to (VIN + 0.3V)
Output Short-Circuit to GND or IN (VIN < 6V) ..............Continuous
Output Short-Circuit to GND or IN (VIN 6V) .........................60s
Continuous Power Dissipation (TA = +70°C)
   3-Pin SOT23 (derate 4.0mW/°C above +70°C)............320mW
Operating Temperature Range ..........................-40°C to +85°C
Storage Temperature Range ...........................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C


Description

The MAX6100MAX6107 are low-cost, low-dropout(LDO), micropower voltage references. These three-terminal references are available with output voltage options of 1.25V, 1.8V, 2.048V, 2.5V, 3V, 4.096V, 4.5V, and 5V.They feature a proprietary curvature-correction circuitand laser-trimmed, thin-film resistors that result in a low temperature coefficient of 75ppm/°C (max) and an initial accuracy of ±0.4% (max). The MAX6107 is specified over the extended temperature range (-40°C to +85°C).

The MAX6107 voltage references draw only 90A of supply current and can source 5mA and sink 2mA of load current. Unlike conventional shunt-mode (two-terminal) references that waste supply current and require an resistor, these devices offer a supply current that is virtually independent of the supply voltage (with only a 4A/V variation with supply voltage) and do not require an external resistor. Additionally, these internally compensated do not require an external compensation capacitor and are stable with load capacitance.Eliminating the external compensation capacitor saves valuable board area in space-critical applications. Lowdropout voltage and supply independent, ultra-low supply current makes MAX6107 ideal for battery-operated, high performance, low-voltage systems.

The MAX6107 is available in tiny 3-pin SOT23 packages.