MAX5928

The discharged filter capacitors of the MAX5928 provide low impedance to the live backplane. High inrush currents from the backplane to the circuit card can burn up connectors and components, or momentarily collapse the backplane power supply leading to a system reset. The MAX5928 hot-swap controllers prevent such problems by gradually ramping up the output volt- age and regulating the current to a preset limit when the board is plugged in, allowing the system to stabilize safely. After the startup cycle is complete, on chip com- parators provide VariableSpeed/BiLevel™ protection against short-circuit and overcurrent faults, and provide immunity against system noise and load transients. The load is disconnected in the event of a fault condition. The MAX5928 automatically restarts after a fault condition, while the MAX5929L must be unlatched. The MAX5928 fault management mode is selectable.