MAX5923

All Voltages with Respect to AGND_S, Unless Otherwise Noted
IN ........................................................................-0.3V to +76V
UVLO......................................................................-0.3V to +6V
VDIG to DGND .......................................................-0.3V to +6V
OUT ...................................................-0.3V to (VDRAIN + 0.3V)
DRAIN.......................................................-0.3V to (VIN + 0.3V)
EN, ZC_EN, ZC, FAULT, POK
and LATCH to DGND .............................................-0.3V to +6V
DGND.......................................................................-5V to +5V
Maximum Current into DRAIN.............................................0.8A
Maximum Current into POK, ZC, FAULT (sinking)..............20mA
Continuous Power Dissipation (TA = +70°C)
20-Pin TSSOP (derate 11.1mW/°C above +70°C) .....879mW
Operating Temperature Range ....................-40°C to +85°C
Junction Temperature.................................................+150°C
Storage Temperature Range .....................-65°C to +160°C
Lead Temperature (soldering, 10s) ...........................+300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

The MAX5923 is a fully integrated Simple Swapper™ hot-swap switch for positive supply rails. The device allows the safe insertion and removal of circuit cards into live backplanes or ports without causing glitches on the power-supply rail. The device also monitors various circuit parameters and disconnects the load if a fault condition occurs, alerting the host with a logiclevel FAULT output. The MAX5923 operates over the +16V to +60V input voltage range.

During startup, an integrated 0.45Ω power MOSFET regulates the current and voltage between the backplane power source and the load. After startup, the MOSFET is fully enhanced to reduce its on-resistance.

To ensure robust operation, the MAX5923 contains built-in safety features that monitor fault conditions and prevent damage to the internal MOSFET.

The MAX5923 monitors three parameters for fault conditions: zero current, overcurrent, and thermal overload. The output overcurrent limit counts the time the MAX5923 spends in an overcurrent condition and shuts down the pass transistor if the current limit is exceeded for the overcurrent time limit. The zero-current detection counts the time the output current is below the zero-current threshold and shuts down the pass transistor if the counter reaches the zero-current time limit. The thermal monitoring feature shuts down the pass transistor if the die temperature reaches the overtemperature limit. A fault logic output indicates when an overtemperature or an overcurrent condition has occurred and a zero-current logic output indicates if there is a zero-current condition.

An undervoltage detection circuitry keeps the pass transistor off until the input voltage is above the undervoltage lockout (UVLO) threshold, which is internally set or can be set externally with a resistive divider. A power-OK (POK) output of MAX5923 is provided to signal when the output voltage has reached to within 0.75V of the input voltage. An Enable input allows the host system to disconnect the system from the load and/or reset a fault condition by toggling Enable.

The MAX5923 is available in a 20-pin TSSOP package and operates in the extended -40°C to +85°C temperature range.