MAX5741

The MAX5741 quad, 10-bit, low-power, buffered voltage- output, digital-to-analog converter (DAC) is packaged in a space-saving 10-pin µMAX package (5mm X3mm). The wide supply voltage range of +2.7V to +5.5V and 229µA supply current accommodates lowpower and low-voltage applications. DAC outputs employ on-chip precision output amplifiers that swing Rail-to-Rail^®. The MAX5741's reference input accepts a voltage range from 0 to VDD. In power-down the reference input is high impedance, further reducing the system's total power consumption.

The 20MHz, 3-wire SPI™, QSPI™, MICROWIRE™ and DSP-compatible serial interface saves board space and reduces the complexity of opto- and transformer-isolated applications. The MAX5741 on-chip power-on reset (POR) circuit resets the DAC outputs to zero and loads the output with a 100kΩ resistor to ground. This provides additional safety for applications that drive valves or other transducers that need to be off on power-up. The MAX5741's software controlled power-down reduces supply current to less than 0.1µA and provides softwareselectable output loads (1kΩ, 100kΩ, or high impedance) while in power-down. The MAX5741 is specified over the -40°C to +125°C extended temperature range and available in a 10-pin µMAX package