Features: · Wiper Position Stored in Nonvolatile Memory (EEPROM) and Recalled Upon Power-Up or Recalled by an Interface Command· 3mm x 3mm x 0.8mm, 16-Pin Thin QFN or 14-Pin TSSOP Packages· ±1 LSB INL, ±0.5 LSB DNL (Voltage-Divider Mode)· 256 Tap Positions· 35ppm/°C End-to-End Resistance Temperatu...
MAX5488: Features: · Wiper Position Stored in Nonvolatile Memory (EEPROM) and Recalled Upon Power-Up or Recalled by an Interface Command· 3mm x 3mm x 0.8mm, 16-Pin Thin QFN or 14-Pin TSSOP Packages· ±1 LSB I...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ·+5V at 10A Output·±36V to ±72V Input Voltage Range·250kHz Switching Frequency·Fully Iso...
The MAX5487/MAX5488/MAX5489 dual, linear-taper, digital potentiometers function as mechanical potentiometers with a simple 3-wire SPI™-compatible digital interface that programs the wipers to any one of 256 tap positions. These digital potentiometers feature a nonvolatile memory (EEPROM) to return the wipers to their previously stored positions upon power-up.
The MAX5487 has an end-to-end resistance of 10kΩ, while the MAX5488 and MAX5489 have resistances of 50kΩ and 100kΩ, respectively. These devices have a low 35ppm/°C end-to-end temperature coefficient, and operate from a single +2.7V to +5.25V supply.
The MAX5487/MAX5488/MAX5489 are available in 16-pin 3mm x 3mm x 0.8mm thin QFN or 14-pin TSSOP packages. Each device is guaranteed over the extended -40°C to +85°C temperature range.