Features: ·UC2842 (MAX5070A) UC2844 (MAX5070B)·2A1A·1MHz MAX5070: Features: ·UC2842 (MAX5070A) UC2844 (MAX5070B)·2A1A·1MHz SeekIC Buyer Protection PLUS - newly updated for 2013! 268 Transactions All payment methods are secure and covered by SeekIC Buyer Protection PLUS. Features: ·+5V at 10A Output·±36V to ±72V Input Voltage Range·250kHz Switching Frequency·Fully Iso... The MAX5070 BiCMOS, high-performance, current-mode PWM controllers have all the features required for wide input voltage range isolated/nonisolated power supplies. The MAX5070 used for low- and high-power universal input voltage and telecom power supplies. The MAX5070 contain a fast comparator with only 60ns typical delay from current sense to the output for overcurrent protection. The MAX5070 has an integrated error amplifier with the output at COMP. Soft-start is achieved by controlling the COMP voltage rise using external components. The frequency is adjustable from 20kHz to 1MHz with an external resistor and capacitor. The timing capacitor discharge current is trimmed allowing for programmable dead time and maximum duty cycle for a given frequency. The available saw-toothed waveform at RTCT can be used for slope compensation when needed. The MAX5070 include a bidirectional synchronization circuit allowing for multiple controllers to run at the same frequency to avoid beat frequencies. Synchronization is accomplished by simply connecting the SYNC pins of all devices together. When synchronizing with other devices, the MAX5070 with the highest frequency synchronizes the other devices. Alternatively, the MAX5070 can be synchronized to an external clock with an opendrain output stage running at a higher frequency. The MAX5070 is available in 8-pin µMAX and SO packages and operate over the automotive temperature range of -40 to +125. Features of MAX5070: (1)Pin-for-Pin Replacement for UC2842 (MAX5070A) and UC2844 (MAX5070B); (2)2A Drive Source and 1A Sink Capability; (3)Up to 1MHz Switching Frequency Operation; (4)Bidirectional Synchronization (MAX5071A/MAX5071B); (5)Advanced Output Drive for Secondary-Side Synchronous Rectification (MAX5071C); (6)Fast 60ns Cycle-by-Cycle Current Limit; (7)Trimmed Oscillator Capacitor Discharge Current Sets Maximum Duty Cycle Accurately ; (8)Accurate 5% Start and Stop Voltage with 6V Hysteresis; (9)Low 32A Startup Current; (10)5V Regulator Output (VREF) with 20mA Capability; (11)Overtemperature Shutdown.floor Price/Ceiling Price
Price Break
Month Sales
Payment Methods
Recent History
Description
Features:
·UC2842 (MAX5070A) UC2844 (MAX5070B)
·2A1A
·1MHz
Application
·AC/DC
·
Pinout
Specifications
VCC (Low-Impedance Source) to GND....................-0.3V to +30V
VCC (ICC < 30mA).....................................................Self Limiting
OUT to GND ................................................-0.3V to (VCC + 0.3V)
OUT Current............................................................±1A for 10µs
FB, SYNC, COMP, CS, RT/CT, VREF to GND................-0.3V to +6V
COMP Sink Current (MAX5070)...........................................10mA
Continuous Power Dissipation (TA = +70°C)
8-Pin µMAX (derate 4.5mW/°C above +70°C) .............362mW
8-Pin SO (derate 5.9mW/°C above +70°C)...............470.6mW
Operating Temperature Range (Automotive) .-40°C to +125°C
Maximum Junction Temperature ...................................+150°C
Storage Temperature Range ........................-65°C to +150°C
Lead Temperature (soldering, 10s) .............................+300°C
Description