Features: ` 6-Bump, 0.5mm Pitch, UCSP
` RON
35 max (+3V Supply)
20 max (+5V Supply)
` 2 max RON Match Between Channels
` 13 max RON Flatness Over Signal Range
` Low Leakage Currents Over Temperature
1nA (max) at TA = +25°C
` Fast Switching: tON = 80ns, tOFF = 25ns
` Guaranteed Break-Before-Make (MAX4698)
` +2.0V to +5.5V Single-Supply Operation
` Rail-to-Rail® Signal Handling
` Low Crosstalk: -75dB (100kHz)
` High Off-Isolation: -75dB (100kHz)
` 1.8V CMOS Logic Compatible
` -3dB Bandwidth: >200MHzApplication·MP3 Players
·Battery-Operated Equipment
·Relay Replacement
·Audio and Video Signal Routing
·Communications Circuits
·PCMCIA Cards
·Cellular Phones
·Hard Drives
·ModemsPinout
SpecificationsAll Voltages Referenced to GND
V+, IN ...................................................................-0.3V to +6V
COM, NO, NC (Note 1).................................-0.3V to (V+ + 0.3V)
Continuous Current COM, NO, NC .................................±20mA
Peak Current COM, NO, NC
(pulsed at 1ms, 10% duty cycle) ...................................±40mA
Continuous Power Dissipation (TA = +70°C)
3 ✕ 2 UCSP (derate 10.1mW/°C at +70°C).................808mW
Operating Temperature Range .......................-40°C to +85°C
Storage Temperature Range .........................-65°C to +150°C
Bump Temperature (soldering)
Infrared (15s) ...............................................................+220°C
Vapor Phase (60s) ........................................................+215°C
Note 1: Signals on NO, NC, and COM exceeding V+ are clamped by an internal diode. Limit forward-diode current to maximum current rating.
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability
DescriptionThe MAX4696/MAX4697/MAX4698 low on-resistance (RON), low-voltage analog switches operate from a single +2.0V to +5.5V supply. The MAX4696/MAX4697 are single-pole/single-throw (SPST) analog switches, and the MAX4698 is a single-pole/double-throw (SPDT) analog switch. The MAX4696 is a normally open (NO) switch, and the MAX4697 is a normally closed (NC) switch.
When powered from a 2.7V supply, these devices feature 35 (max) RON, with 2 (max) RON matching and 13 (max) flatness. The MAX4696/MAX4697/MAX4698 offer fast switching speeds (tON = 80ns max, tOFF = 25ns max). The MAX4698 offers a break-before-make function.
The digital logic inputs are 1.8V logic compatible from a +2.7V to +3.3V supply and are TTL/CMOS compatible from a +4.5V to +5.5V supply. The MAX4696/MAX4697/MAX4698 are packaged in the chip-scale package (UCSP™), significantly reducing the required PC board area. The device occupies only a 1.50mm * 1.02mm area. The 3*2 array of solder bumps are spaced with a 0.5mm bump pitch.
MAX4696 Data Sheet
