MAX4690

Features:

Low On-Resistance (1.25Ωmax)
Guaranteed R_ON Match Between Channels (0.3Ω max)
Guaranteed R_ON Flatness Over Specified Signal Range (0.3Ω max)
Rail-to-Rail Signal Handling
Guaranteed Break-Before-Make (MAX4700)
+4.5V to +36V Single-Supply Operation ±4.5V to ±20V Dual-Supply Operation
TTL/CMOS-Compatible Control Inputs
>2kV ESD Protection per Method 3015.7


Application

Reed Relay ReplacementData Acquisition Systems Test EquipmentSample-and-Hold Circuits Communication Systems PBX, PABX Systems

Pinout




Specifications

V+ to GND................................................................-0.3V to +44V
V- to GND.................................................................+0.3V to -44V
V+ to V-...................................................................-0.3V to +44V
V_L to GND.......................................................-0.3V to (V+ + 0.3V)
All Other Pins to GND (Note 1) ...............(V- - 0.3V) to (V+ + 0.3V)
Continuous Current (COM_, NO_, NC_) ..........................±200mA
Peak Current (COM_, NO_, NC_)
(pulsed at 1ms, 10% duty cycle) .....................................±300mA
Continuous Power Dissipation (T A = +70°C)
SSOP (derate 7.1mW/°C above +70°C)...........................571mW
Wide SO (derate 9.52mW/°C above +70°C) ...................762mW
Plastic DIP (derate 10.53mW/°C above +70°C)...............842mW
Operating Temperature Ranges
MAX4_ _0C_E ........................................................0°C to +70°C
MAX4_ _0E_E......................................................-40°C to +85°C
Storage Temperature Range ............................-65°C to +150°C
Lead Temperature (soldering, 10sec) ..............................+300°C


Description

The MAX4680/MAX4690/MAX4700 dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to 0.3Ω max and is flat (0.3Ω max) over the specified signal range. Each switch can handle Rail-to-Rail ® analog signals. Off-leakage current is only 5nA max at +85°C. The MAX4690 is ideal in low-distortion applications and are the preferred solution over mechanical relays in automatic test equipment or applications where current switching is required. They have low power requirements, require less board space, and are more reliable than mechanical relays.

The MAX4680 has two NC (normally closed) switches, and the MAX4690 has two NO (normally open) switches. The MAX4700 has one NC and one NO switch and features guaranteed break-before-make switching. The MAX4690 operates from a +4.5V to +36V single supply or from ±4.5V to ±20V dual supplies. A separate logic supply pin guarantees TTL/CMOS-logic compatibility while operating across the entire supply voltage range.