MAX4688

Features:

` 6-Bump, 0.5mm Pitch, UCSP
` RON
        2.5Ω max (+3V Supply)
        10Ω max (+1.8V Supply)
`0.4Ω max RON Match Between Channels
`1Ω max RON Flatness Over Signal Range
`Low Leakage Currents Over Temperature
        0.5nA (max) at T<sub>A</sub> = +25
`Fast Switching: tON = 30ns, tOFF = 12ns
`Guaranteed Break-Before-Make (MAX4688)
`+1.8V to +5.5V Single-Supply Operation
`Rail-to-Rail® Signal Handling
`Low Crosstalk: -95dB (100kHz)
`High Off-Isolation: -90dB (100kHz)
`1.8V Logic Compatible


Application

·MP3 Players
·Cellular Phones
·Power Routing
·Battery-Operated Equipment
·Relay Replacement
·Audio and Video Signal Routing
·Communications Circuits
·PCMCIA Cards
·Cellular Phones
·Hard Drives


Pinout

Specifications

All Voltages Referenced to GND
V+, IN ...........................................................................-0.3V to +6V
COM, NO, NC (Note1)........................................-0.3V to (V+ + 0.3V)
Continuous Current NO, NC, COM ......................................±100mA
Peak Current NO, NC, COM
(pulsed at 1ms, 10% duty cycle) .......................................±200mA
Continuous Power Dissipation (TA = +70)
3 x 2 UCSP (derate 10.1mW/ at +70) ...........................808mW
Operating Temperature Range ................................-40 to +85
Storage Temperature Range .................................-65 to +150
Bump Reflow Temperature ..................................................+235


Description

The MAX4686/MAX4687/MAX4688 low on-resistance (RON), low-voltage analog switches operate from a single +1.8V to +5.5V supply. The MAX4686/MAX4687 are single-pole/single-throw (SPST) analog switches, and the MAX4688 is a single-pole/double-throw (SPDT) analog switch. The MAX4686 is a normally open (NO) switch, and the MAX4687 is a normally closed (NC) switch. The MAX4688 has one normally open (NO) switch and one normally closed (NC) switch.

When powered from a 3V supply these devices feature 2.5Ω (max) RON, with 0.4Ω (max) RON matching and 1Ω (max) flatness. The MAX4686/MAX4687/MAX4688 offer fast switching speeds (tON = 30ns max, tOFF = 12ns max). The MAX4688 offers break-before-make action.

The digital logic inputs are 1.8V logic compatible from a +2.7V to +3.3V supply. The MAX4686/MAX4687/MAX4688 are available in the chip-scale package (UCSP™), significantly reducing the required PC board area. The chip occupies only a 1.50mm x 1.02mm area.

The 3 x 2 array of solder bumps are spaced with a 0.5mm bump pitch.