MAX4669

Low On-Resistance (2.5½ max)
Guaranteed RON Match Between Channels (0.5½ max)
Guaranteed RON Flatness over Specified Signal Range (0.5½ max)
Guaranteed Break-Before-Make (MAX4669)
Rail-to-Rail Signal Handling
Guaranteed ESD Protection >2kV per Method 3015.7
+4.5V to +36V Single-Supply Operation ±4.5V to ±20V Dual-Supply Operation
TTL/CMOS-Compatible Control Inputs

Reed Relay Replacement                                  PBX, PABX Systems
Test Equipment                                              Audio-Signal Routing
Communication Systems                                                    Avionics

V+ to GND .......................................................................................-0.3V to +44V
V- to GND ........................................................................................+0.3V to -44V
V+ to V-...........................................................................................-0.3V to +44V
VL to GND ..................................................................(GND - 0.3V) to (V+ + 0.3V)
All Other Pins to GND (Note 1) ......................................(V- - 0.3V) to (V+ + 0.3V)
Continuous Current (COM_, NO_, NC_)..................................................±100mA
Peak Current (COM_, NO_, NC_)
(pulsed at 1ms, 10% duty cycle)............................................................ ±300mA
Continuous Power Dissipation (TA = +70°C)
Narrow SO (derate 8.70mW/°C above +70°C) .....................................696mW
Plastic DIP (derate 10.53mW/°C above +70°C) ....................................842mW
Operating Temperature Ranges
MAX466_C_E ................................................................................0°C to +70°C
MAX466_E_E ............................................................................-40°C to +85 °C
Storage Temperature Range ...................................................-65°C to +150°C
Lead Temperature (soldering, 10sec) .....................................................+300°C

The MAX4667/MAX4668/MAX4669 dual analog switches feature low on-resistance of 2.5½ max. On-resistance is matched between switches to 0.5½ max and is flat (0.5½ max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. The off-leakage current is only 5nA max at +85°C. The MAX4669 is ideal in low-distortion applications and are the preferred solution over mechanical relays in automatic test equipment or applications where current switching is required. They have low power requirements, use less board space, and are more reliable than mechanical relays.

The MAX4667 has two normally closed (NC) switches, the MAX4668 has two normally open (NO) switches, and the MAX4669 has one NC and one NO switch that guarantee break-before make operation.

The MAX4669 operates from a +4.5V to +36V single supply or from ±4.5V to ±20V dual supplies. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring TTL/CMOS-logic compatibility when using ±15V supplies or a single +12V supply.