MAX4392

Features:

Low Cost
High Speed
   85MHz -3dB Bandwidth
   27MHz 0.1dB Gain Flatness
   500V/µs Slew Rate
Single 4.5V to 11V or Dual ±2.25V to ±5.5V
Operation
Rail-to-Rail Outputs
Input Common-Mode Range Extends to VEE
Low Differential Gain/Phase: 0.015%/0.015°
Low Distortion at 5MHz
   -59dBc Spurious-Free Dynamic Range
High Output Drive: ±50mA
450µA Disable Capability
   (MAX4389/MAX4393/MAX4394/MAX4396)
Space-Saving SC70, SOT23, µMAX, or TSSOP Packages

Application

Set-Top Boxes
Surveillance Video Systems
Analog-to-Digital Converter Interface
CCD Imaging Systems
Digital Cameras
Video-on-Demand
Video Line Driver


Specifications

Supply Voltage (V_CC to V_EE) ................................-0.3V to +12V
IN_+, IN_-, OUT_, DISABLE.............(V_EE - 0.3V) to (V_CC + 0.3V)
Differential Input Voltage ................................................±2.5V
Current into Input Pins ..................................................±20mA
Output Short-Circuit Duration to
VCC or VEE (Note 1)................................................Continuous
Continuous Power Dissipation (TA = +70°C)
5-Pin SOT23 (derate 7.1mW/°C above +70°C)............571mW
6-Pin SOT23 (derate 8.7mW/°C above +70°C)............696mW
6-Pin SC70 (derate 3.1mW/°C above +70°C) .............245mW
8-Pin SO (derate 5.88mW/°C above +70°C)................471mW
8-Pin µMAX (derate 4.5mW/°C above +70°C) .............362mW
10-Pin µMAX (derate 5.6mW/°C above +70°C) ...........444mW
14-Pin SO (derate 8.33mW/°C above +70°C)..............667mW
14-Pin TSSOP (derate 10mW/°C above +70°C) ..........727mW
20-Pin TSSOP (derate 10.9mW/°C above +70°C) .......879mW
Operating Temperature Range .......................-40°C to +85°C
Junction Temperature....................................................+150°C
Storage Temperature Range ........................-65°C to +150°C
Lead Temperature (soldering, 10s) ..............................+300°C


Description

The MAX4389/MAX4390/MAX4392MAX4396 family of op amps are unity-gain stable devices that combine high-speed performance, Rail-to-Rail® outputs, and disable mode. These devices are targeted for applications where an input or an output is exposed to the outside world, such as video and communications.

The MAX4389/MAX4390/MAX4392MAX4396 operate from a single 4.5V to 11V supply or from dual ±2.25V to ±5.5V supplies. The common-mode input voltage range extends to the negative power-supply rail (ground in single-supply applications). The MAX4389/MAX4390/MAX4392MAX4396 consume only 5.5mA of quiescent supply current per amplifier while achieving a 85MHz-3dB bandwidth, 27MHz 0.1dB gain flatness, and a 500V/µs slew rate. Disable mode sets the outputs to high impedance while consuming only 450µA of current.