MAX428

© Fast Settling Time: ±0.1% In 150ns
© High Slew Rate: 90V/s
© Large Gain Bandwidth: 100MHz
© Full Power Bandwidth: 4.8MHz at 6V p-p
© Ease of Use: Internally Compensated for ACL  3 with 50°60° Phase Margin
© Low Supply Voltage Operation: ±4V
© Wide Input Voltage Range: Within 1.5V of V+ and 0.5V of V-
© Minimal Crosstalk: >90dB Separation (MAX428/448)
© Short Circuit Protection

Video Amplifiers
Test Equipment
Waveform Generators
Video Distribution
Pulse Amplifiers

Supply Voltages......................................................................+6V
Differential Input Voltage .......................................................+9V
Common Mode Input Voltage .......................................|Vs| -0.5V
Output Short Circuit Current Duration ...........................Indefinite
Continuous Power Dissipation (T_A = +70°C)
    8-Pin Plastic DIP (derate 9.09mW/°C above +70°C) ..727mW
    8-Pin SO (derate 5.88mW/°C above +70°C)...............471mW
    14-Pin Plastic DIP
           (derate 10.00mW/°C above +70°C).....................800mW
14-Pin SO (derate 8.33mW/°C above +70°C)..................667mW
Operating Temperature Range
    Commercial (MAX4_8AC/C) ................................0°C to +70°C
Storage Temperature Range ............................-65°C to +150°C
Lead Temperature (Soldering, 60 seconds)......................+300° C

The MAX428 is high speed general purpose monolithic operational amplifiers in a single, dual or quad package, that are useful for signal frequencies extending into the video range. The MAX428 function in gain configurations greater-than or equal-to 3. High output current allows large capacitive loads to be driven at high speeds.
Open-loop voltage gain of 10k V/V and high slew rate of 90V/s make the MAX428 ideal for analog amplification and high speed signal processing. 100MHz gain bandwidth and a ±0.1% settling time of l50ns make each amplifier ideal for fast data conversion systems.
The MAX428 is capable of driving back terminated transmission lines of 75 with amplitudes of 5V peakto-peak.
Along with the high speed and output drive capability, a 35nA offset current and trimmable offset voltage make the MAX428 optimal for signal conditioning applications where accuracy must be maintained.