Features: ` Low Supply Current: 1.5mA per Amplifier
` Fast Enable/Disable Times: 120ns/35ns
` Very Low Switching Transient: 45mVp-p
` High Speed 200MHz -3dB Small-Signal Bandwidth (MAX4188, AVCL +2) 250MHz -3dB Small-Signal Bandwidth (MAX4189, AVCL +1) 185MHz -3dB Small-Signal Bandwidth (MAX4190, AVCL +2)
` High Slew Rate 350V/s (MAX4188, AVCL +2) 175V/s (MAX4189, AVCL +1)
` Excellent Video Specifications 85MHz -0.1dB Gain Flatness (MAX4190) 30MHz -0.1dB Gain Flatness (MAX4189) Differential Gain/Phase Errors 0.03%/0.05° (MAX4188)
` Low-Power Disable Mode Inputs Isolated, Outputs Placed in High-Z Supply Current Reduced to 450A per Amplifier
` Fast Settling Time of 22ns to 0.1%
` Low Distortion 70dB SFDR (fc = 5MHz, VO = 2Vp-p, MAX4188)
` Available in Space-Saving Packages 16-Pin QSOP (MAX4188/MAX4189) 8-Pin MAX (MAX4190)
Application·High-Definition Surveillance Video
·High-Speed Switching/Multiplexing
·Portable/Battery-Powered Video/Multimedia
·Systems
·High-Speed Analog-to-Digital Buffers
·Medical Imaging
·High-Speed Signal Processing
·Professional Cameras
·CCD Imaging Systems
·RGB Distribution AmplifiersSpecificationsSupply Voltage (VCC to VEE)...........................................+12V
IN_+, IN_-, DISABLE_ Voltage ....(VEE - 0.3V) to (VCC + 0.3V)
Differential Input Voltage (IN_+ to IN_-).....................±1.5V
Maximum Current into IN_+ or IN_-...........................±10mA
Output Short-Circuit Current Duration................. Continuous
Continuous Power Dissipation (TA = +70°C)
8-Pin SO (derate 5.88mW/°C above +70°C)............471mW
8-Pin MAX (derate 4.1mW/°C above +70°C) .........330mW
14-Pin SO (derate 8.3mW/°C above +70°C) ............667mW
16-Pin QSOP (derate 8.3mW/°C above +70°C)........ 667mW
Operating Temperature Range......................-40°C to +85°C
Storage Temperature Range .......................-65°C to +150°C
Lead Temperature (soldering, 10sec) .........................+300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
DescriptionThe MAX4188/MAX4189/MAX4190 are low-power, current-feedback video amplifiers featuring fast disable/ enable times and low switching transients. The triple MAX4188 and the single MAX4190 are optimized for applications with closed-loop gains of +2V/V (6dB) or greater and provide a -3dB bandwidth of 200MHz and 185MHz, respectively. The triple MAX4189 is optimized for closed-loop applications with gains of +1V/V (0dB) or greater and provides a 250MHz -3dB bandwidth.
These amplifiers feature 0.1dB gain flatness up to 80MHz with differential gain and phase errors of 0.03% and 0.05°. These features make the MAX4188 family ideal for video applications.
The MAX4188/MAX4189/MAX4190 operate from a +5V single supply or from ±2.25V to ±5.5V dual supplies. These amplifiers consume only 1.5mA per amplifier and are capable of delivering ±55mA of output current, making them ideal for portable and battery-powered equipment.
The MAX4188/MAX4189/MAX4190 have a high-speed disable/enable mode that isolates the inputs, places the outputs in a high-impedance state, and reduces the supply current to 450A per amplifier. Each amplifier can be disabled independently. High off isolation, low switching transient, and fast enable/disable times (120ns/35ns) allow these amplifiers to be used in a wide range of multiplexer applications. A settling time of 22ns to 0.1%, a slew rate of up to 350V/s, and low distortion make these devices useful in many generalpurpose, high-speed applications.
The MAX4188/MAX4189 are available in a tiny 16-pin QSOP package, and the MAX4190 is available in a space-saving 8-pin MAX package.
MAX4188 Data Sheet
