MAX4074

Internal Gain-Setting Resistors in SOT23
   Packages (MAX4074)
0.1% Gain Accuracy (RF/RG)

   (MAX4074/75)
54 Standard Gains Available (MAX4074/75)
Open-Loop, Unity-Gain-Stable Op Amps
   (MAX4076/77/78)
Rail-to-Rail Outputs Drive 1kΩ Load (MAX4074/75)
+2.5V to +5.5V Single Supply
34µA Supply Current (MAX4074/75)
Up to 4MHz GBW Product
Fault-Protected Inputs Withstand ±17V
   (MAX4074/75)
200pA max Input Bias Current (MAX4076/77/78)
Stable with Capacitive Loads up to 100pF
   with No Isolation Resistor

Supply Voltages (V_CC to V_EE)..............................................-0.3V to +6V
Voltage Inputs (IN_)

MAX4076/MAX4077/MAX4078......................(VCC+ 0.3V) to (VEE- 0.3V)
MAX4074/MAX4075........................................................................±17V
Output Short-Circuit Duration to Either Supply (OUT_). . . . Continuous
Continuous Power Dissipation (T_A= +70°C)
5-Pin SOT23 (derate 7.1mW/°C above +70°C) .........................571mW
14-Pin TSSOP (derate 6.3mW/°C above +70°C)........................500mW

8-Pin µMAX (derate 4.1mW/°C above +70°C)............................330mW
8-Pin SO (derate 5.88mW/°C above +70°C)..............................471mW
14-Pin SO (derate 8.33mW/°C above +70°C)............................667mW
Operating Temperature Range......................................-40°C to +85°C
Junction Temperature.................................................................+150°C
Storage Temperature Range........................................-65°C to +150°C
Lead Temperature (soldering, 10sec).........................................+300°C

The MAX4074MAX4078 GainAmp™ op amp family combines low-cost Rail-to-Rail^®op amps with precision internal gain-setting resistors. Factory-trimmed on-chipresistors decrease design size, cost, and layout, and provide 0.1% gain accuracy. Fixed inverting gains from  -0.25V/V to -100V/V or noninverting gains from +1.25V/V to +101V/V are available. These devices operate from a single +2.5V to +5.5V supply and consume just 34µA. GainAmp amplifiers are optimally compensated for each gain version, achieving gain bandwidth (GBW) productsup to 4MHz (AV= +25V/V to +101V/V). High-voltagefault protection withstands ±17V at either input without damage or excessive current draw (MAX4074/MAX4075only).

Two versions are available in this amplifier family. The MAX4076/MAX4077/MAX4078 are single/dual/quad open-loop, unity-gain-stable op amps, and the MAX4074/MAX4075 are single/dual fixed-gain op amps. The input common-mode voltage range of the open-loop amplifiers extends from 150mV below the negative supply to within 1.2V of the positive supply. The GainAmp outputs can swing rail-to-rail and drive a 1kΩ load while maintaining excellent DC accuracy (MAX4074/MAX4075 only).  The amplifiers are stable for capacitive loads up to 100pF. For space-critical applications, the MAX4074/MAX4076 are available in space-saving SOT23-5 packages.