Features: Single-Supply Operation Down to +2.4V
Ultra-Low Power Consumption:
10µA Supply Current per Amplifier
1µA Shutdown Mode (MAX4041/MAX4043)
Rail-to-Rail Input Common-Mode Range
Outputs Swing Rail-to-Rail
No Phase Reversal for Overdriven Inputs
200µV Input Offset Voltage
Unity-Gain Stable for Capacitive Loads up to 200pF
90kHz Gain-Bandwidth Product
Available in Space-Saving 5-Pin SOT23 and
8-Pin µMAX PackagesApplicationBattery-Powered Strain Gauges
Systems Sensor Amplifiers
Portable/Battery-Powered Cellular Phones
Electronic Equipment Notebook Computers
Digital Scales PDAsPinout
SpecificationsSupply Voltage (VCC to VEE).................................................+6V
All Other Pins......................................(VCC+ 0.3V) to (VEE- 0.3V)
Output Short-Circuit Duration to VCCor VEE...............Continuous
Continuous Power Dissipation (TA= +70°C)
5-Pin SOT23 (derate 7.1mW/°C above +70°C).............571mW
8-Pin µMAX (derate 4.1mW/°C above +70°C)...............330mW
8-Pin SO (derate 5.88mW/°C above +70°C).................471mW
10-Pin µMAX (derate 5.6mW/°C above +70°C)..............444mW
14-Pin SO (derate 8.33mW/°C above +70°C)................667mW
Operating Temperature Range..........................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range...........................-65°C to +160°C
Lead Temperature (soldering, 10sec)..............................+300°C
DescriptionThe MAX4044 of micropower op amps operates from a single +2.4V to +5.5V supply or dual ±1.2V to ±2.75V supplies and have Rail-to-Rail® inputand out pabilities.These amplifiers MAX4044 provide a 90kHz gain-bandwidth product while using only 10µA of supply currenamplifiTheMAX4041/MAX4043haveaowpowershutdownmodethatreducessupplycurrent to less than 1µA and forces the output into a high-impedance state. The combination of low-voltage operation, rail-to-rail inputs and outputs, and ultra-lowpowerconsumptionmakes these MAX4044 ideal for any portable/battery-powered system.
These amplifiers MAX4044 have outputs that typically swing towithin 10mV of the rails with a 100kΩload. Rail-to-rail input and output characteristics allow the full power-supply voltage to be used for signal range. The combi- nation of low input offset voltage, low input bias current,and high open-loop gain makes them suitable for low-power/low-voltage precision applications.
The MAX4040 is offered in a space-saving 5-pin SOT23 package. All specifications are guaranteed over the -40°C to +85°C extended temperature range.
MAX4044 Data Sheet
