Features: Low-Cost
High Speed:
200MHz -3dB Bandwidth (MAX4012)
150MHz -3dB Bandwidth (MAX4016/18/20)
30MHz 0.1dB Gain Flatness
600V/µs Slew Rate
Single 3.3V/5.0V Operation
Rail-to-Rail Outputs
Input Common-Mode Range Extends Beyond VEE
Low Differential Gain/Phase: 0.02%/0.02°
Low Distortion at 5MHz:
-78dBc SFDR
-75dB Total Harmonic Distortion
High Output Drive: ±120mA
400µA Shutdown Capability (MAX4018)
High Output Impedance in Off State (MAX4018)
Space-Saving SOT23-5, µMAX, or QSOP PackagesApplicationSet-Top Boxes
Surveillance Video Systems
Battery-Powered Instruments
Video Line Driver
VAnalog-to-Digital Converter Interface
CCD Imaging Systems
Video Routing and Switching SystemsSpecificationsSupply Voltage (VCCto VEE)................................................+12V
IN_-, IN_+, OUT_, EN_.......................(VEE- 0.3V) to (VCC+ 0.3V)
Output Short-Circuit Duration to VCCor VEE..............Continuous
Continuous Power Dissipation (TA= +70°C)
5-Pin SOT23 (derate 7.1mW/°C above +70°C)..............571mW
8-Pin SO (derate 5.9mW/°C above +70°C)....................471mW
8-Pin µMAX (derate 4.1mW/°C above +70°C)................330mW
14-Pin SO (derate 8.3mW/°C above +70°C)..................667mW
16-Pin QSOP (derate 8.3mW/°C above +70°C)..............667mW
Operating Temperature Range..........................-40°C to +85°C
Storage Temperature Range............................-65°C to +150°C
Lead Temperature (soldering, 10sec).............................+300°C
DescriptionThe MAX4012 single, MAX4016 dual, MAX4018ESA triple, and MAX4020 quad op amps are unity-gain-stable devices that combine high-speed performance with Rail-to-Rail® outputs. The MAX4018ESA has a disable fea- ture that reduces power-supply current to 400µA and places its outputs into a high-impedance state. These devices operate from a +3.3V to +10V single supply or from ±1.65V to ±5V dual supplies. The common-mode input voltage range of MAX4018ESA extends beyond the negative power-supply rail (ground in single-supply applica- tions).
These MAX4018ESA require only 5.5mA of quiescent supply current while achieving a 200MHz -3dB bandwidth and a 600V/µs slew rate. These parts are an excellent solu-tion in low-power/low-voltage systems that require wide bandwidth, such as video, communications, and instru- mentation. In addition, when disabled, MAX4018ESA's high output impedance makes them ideal for multiplexing applica- tions.
The MAX4012 comes in a miniature 5-pin SOT23 pack- age, while the MAX4016 comes in 8-pin µMAX and SO packages. The MAX4018ESA/MAX4020 are available in a space-saving 16-pin QSOP, as well as a 14-pin SO.
MAX4018ESA Data Sheet
