MAX3355E

Features:

·Guaranteed 8mA (min) VBUS Charge-Pump Output
·±15kV ESD Protection on VBUS and ID_IN
·Up to +6.0V Backdrive Capability for VBUS
·+2.6V to +5.5V Operating Voltage Range
·V_L Operates Down to +1.65V
·Guaranteed VBUS Input Impedance When Not Driven
·Automatic CLOAD Detection
·Comparators for Host Negotiation Protocol
·ID_IN Detection
·Available in 4 x 3 UCSP or 14-Pin TSSOP Package



Application

·Cell Phones
·PDAs
·MP3 Players
·Digital Cameras


Pinout




Specifications

(All voltages referenced to GND)
V_CC, V_L, V_BUS, ID_IN.............................................-0.3V to +6.0V
C+.................................................................(VCC - 0.3V) to +6V
C-...............................................................-0.3V to (V_CC + 0.3V)
OFFVBUS, SHDN, STATUS1,
STATUS2, ID_OUT ........................................-0.3V to (VL + 0.3V)
VBUS Short Circuit to GND .........................................Continuous
Output Current (all other pins).........................................±15mA
Continuous Power Dissipation (T_A = +70)
4 x 3 UCSP (derate 6.5mW/°C above +70) .................520mW
14-Pin TSSOP (derate 9.1mW/°C above +70) .............727mW
Operating Temperature Range .............................-40 to +85
Storage Temperature Range ..............................-65 to +150
Junction Temperature........................................................+150
Lead Temperature (soldering, 10s) ..................................+300
Bump Temperature (soldering)
Infrared (15s) ...................................................................+200
Vapor Phase (20s) ............................................................+215


Description

The MAX3355E integrates a charge pump and comparators to enable a system with an integrated USB onthe- go (OTG) dual-role transceiver to function as a USB OTG dual-role device. USB OTG facilitates the direct connection of peripherals and mobile devices such as PDAs, cellular phones, MP3 players, and digital cameras to one another without a host PC.

The MAX3355E's internal charge pump supplies VBUS power and signaling that is required by the transceiver as defined in On-the-Go Supplement to the USB 2.0 Specification, Revision 1.0. The MAX3355E features ID detection and internal comparators for monitoring VBUS. The VBUS status outputs are used during negotiation for the USB according to the session request protocol (SRP) and host negotiation protocol (HNP).

The MAX3355E operates with logic supply voltages (V_L) as low as 1.65V, ensuring compatibility with lowvoltage ASICs. The device also features a logic-selectable 1µA shutdown mode.

The MAX3355E has built-in ±15kV ESD-protection circuitry to protect the VBUS and ID_IN pins. The device is available in a miniature 4 x 3 chip-scale package (UCSP), as well as a 14-pin TSSOP package, and is specified for operation over the -40 to +85 extended temperature range.