MAX3183E

Features:

 Tiny SOT23-5 Package
ESD-Protected RS-232 Input
    ±15kV-Human Body Model
    ±8kV-IEC 1000-4-2, Contact Discharge
    ±15kV-IEC 1000-4-2, Air-Gap Discharge
0.5µA Supply Current
1.5Mbps Guaranteed Data Rate
Meets EIA/TIA-232 and V.28/V.24 Specifications Down to VCC = +3.0V
INVALID Output Indicates Valid RS-232 Signal at Receiver
    Input (MAX3181E/MAX3183E)
Three-State TTL/CMOS Receiver Output (MAX3180E/MAX3182E)
Noninverting RS-232 Output (MAX3182E/MAX3183E) 


Application

Diagnostic Ports
Telecommunications
Networking Equipment
Set-Top Boxes
Digital Cameras
Hand-Held Equipment


Pinout




Specifications

VCC to GND............................................................-0.3V to +6V
RIN to GND........................................................................±25V
EN , ROUT, INVALID to GND......................-0.3V to (VCC + 0.3V)
Continuous Power Dissipation (TA = +70°C)
SOT23-5 (derate 7.1mW/°C above +70°C)..................571mW
Operating Temperature Range .......................-40°C to +85°C
Storage Temperature Range ........................-65°C to +150°C
Lead Temperature (soldering, 10sec) ..........................+300°C


Description

The MAX3180EMAX3183E single RS-232 receivers in a SOT23-5 package are designed for space- and cost constrained applications requiring minimal RS-232 communications. The receiver inputs are protected to ±15kV using IEC 1000-4-2 Air-Gap Discharge, to ±8kV using IEC 1000-4-2 Contact Discharge, and to ±15kV per the Human Body Model, ensuring compliance with international standards.

The MAX3180EMAX3183E devices minimize power and heat dissipation by consuming only 0.5µA supply current from a +3.0V to +5.5V supply, and they guarantee true RS-232 performance up to a 1.5Mbps data rate. The MAX3180E/ MAX3182E feature a three-state TTL/CMOS receiver output that is controlled by an EN logic input.

The MAX3180EMAX3183E feature an  INVALID output that indicates valid RS-232 signals at the receiver input for applications requiring automatic system wake-up. The MAX3182E/MAX3183E have a noninverting output, while the MAX3180E/MAX3181E have a standard inverting output.