MAX3056

Features: · Pin and Functionally Compatible with TJA1054· ±80V Fault Protection Suitable for 42V Battery Systems· Low RFI/Excellent EMC Immunity· Full Wake-Up Capability During Failure Modes· Bus-Failure Management· Support Single-Wire Transmission Mode with Ground Offset Voltages Up to 1.5V· Ther...

product image

MAX3056 Picture
SeekIC No. : 004409789 Detail

MAX3056: Features: · Pin and Functionally Compatible with TJA1054· ±80V Fault Protection Suitable for 42V Battery Systems· Low RFI/Excellent EMC Immunity· Full Wake-Up Capability During Failure Modes· Bus-Fa...

floor Price/Ceiling Price

Part Number:
MAX3056
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/27

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

· Pin and Functionally Compatible with TJA1054
· ±80V Fault Protection Suitable for 42V Battery Systems
· Low RFI/Excellent EMC Immunity
· Full Wake-Up Capability During Failure Modes
· Bus-Failure Management
· Support Single-Wire Transmission Mode with Ground Offset Voltages Up to 1.5V
· Thermally Protected
· Do Not Disturb the Bus Line when Unpowered
· Low-Current Sleep and Standby Mode with Wake- Up Through Bus Lines
· Up to 250kbps Data Rate (MAX3054)



Application

Automotive


Pinout

  Connection Diagram


Specifications

(All voltages are referenced to GND)
Supply Voltage (VCC) ..............................................-0.3V to +6V
Battery Voltage (VBATT).........................................-0.3V to +80V
TXD, RXD, ERR, STB, EN .............................-0.3V to (VCC + 0.3V)
CANH, CANL ..........................................................-80V to +80V
RTH, RTL ...............................................................-0.3V to +80V
RTH, RTL Current ..........................................................±180mA
WAKE ....................................................................-0.3V to +80V
INH .........................................................-0.3V to (VBATT + 0.3V)
INH Current......................................................................-0.5mA
Transient Voltage (ISO 7637)................................-200V, +200V*
Continuous Power Dissipation (TA = +70°C)
14-Pin SO (derate 8.3mW/°C above +70°C)................667mW
Operating Temperature Range ......................-40°C to +125°C
Junction Temperature.....................................................+150°C
Storage Temperature Range .........................-65°C to +150°C
Lead Temperature (soldering, 10s) ...............................+300°C
*Pending completion of testing.
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.




Description

The MAX3054/MAX3055/MAX3056 are interfaces between the protocol controller and the physical wires of the bus lines in a controller area network (CAN). The devices provide differential transmit capability and switch to single-wire mode if certain fault conditions occur. The MAX3054/MAX3055/MAX3056 guarantee full wake-up capability during failure modes.

The extended fault-protected voltage range of CANH and CANL bus lines of ±80V allows for use in 42V automotive applications. Current-limiting and thermalprotection circuits protect the transmitter output stage against overcurrent faults to prevent destruction of the transmitter output stage. The CANH and CANL lines are also protected against electrical transients that may occur in an automotive environment.The MAX3054/MAX3055/MAX3056  transceiver provides three low-power modes that can be entered and exited through pins STB and EN. An output INH pin can be used for deactivation of an external voltage regulator.

The MAX3054/MAX3055/MAX3056 are designed to provide optimal operation for a specified data rate. The MAX3054 is ideal for high data rates of 250kbps. The MAX3055 is used for data rates of 125kbps and the MAX3056 is designed for 40kbps applications. For the 40kbps and 125kbps versions, a built-in slope-control feature allows the use of unshielded cables, and receiver input filters guarantee high noise immunity.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Fans, Thermal Management
Discrete Semiconductor Products
Cables, Wires - Management
RF and RFID
Test Equipment
Tapes, Adhesives
803
View more