MAX2244

Features:

·2.4GHz to 2.5GHz Operation
·Accurate Closed-Loop Output Power Control Over Full Temperature, Supply, and Input Power Range
·Convenient Analog Power-Control Interface
·22dBm Peak Output Power (MAX2244/MAX2245)
·20dBm Peak Output with 30% Reduced Supply Current (MAX2246)
·Internal Bandwidth-Limited Power Ramping
·50Ω Integrated Input Match
·0.5µA Shutdown Supply Current
·Ultra Chip-Scale Package (1.56mm X 1.56mm)


Application

·Bluetooth Class 1 Radios
·802.11 FHSS/HomeRF™ Radios
·2.4GHz Cordless Phones


Pinout




Specifications

V_CC1, V_CC2, RFOUT to GND .....................................-0.3V to +6.0V
RFIN/SHDN , PC to GND.................................-0.3V to (V_CC + 0.3V)
RF Input Power (RFIN).......................................................+10dBm
Load Mismatch (VSWR) Without Damage .................................6:1
Continuous Power Dissipation (T_A = +85)
9-Pin UCSP (derate 8.8mW/ above T_A = +85)..............700mW
Operating Temperature Range ...............................-40 to +85
Junction Temperature ........................................................+150
Storage Temperature Range ................................-65 to +150
Continuous Operating Lifetime............10 years x 0.935(T_A - 65)
(for operating temperature 65 < TA < 85)


Description

The MAX2244/MAX2245/MAX2246 single-supply, lowvoltage power amplifiers (PAs) are designed for 20dBm Bluetooth™ Class 1 applications in the 2.4GHz to 2.5GHz band. The MAX2244/MAX2245 deliver a peak output power of 22dBm with greater than 20dB output-power control range. The 22dBm output power compensates for the filter loss between the PA and the antenna, allowing 20dBm to be delivered to the antenna. The MAX2246 provides a peak output power of 20dBm for a 30% reduction in supply current.

The PAs integrate a power detector and closed-loop power-control circuitry to provide nearly constant output power over the full range of supply voltage, temperature, and input power level. The voltage at the analog control input precisely controls the output power level.

The MAX2244/MAX2245/MAX2246 feature a low-current shutdown mode through a simple logic input. Internal circuitry automatically controls the ramp-up/down of the output power level during turn-on and turn-off to meet Bluetooth spurious emissions requirements.

The devices operate from a 3V to 3.6V single supply. The MAX2244/MAX2246 have a power-control voltage range of 0.5V to 2V, and the MAX2245 has a control voltage range of 0.9V to 2.2V. The devices are packaged in a miniature ultra chip-scale package (UCSP™), significantly reducing the required board area.