MAX147

The MAX146/MAX147 12-bit data-acquisition systems combine an 8-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption. The MAX146 operates from a single +2.7V to +3.6V supply; the MAX147operates from a single +2.7V to +5.25V supply. Both devices' analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation.

The 4-wire serial interface connects directly to SPI™/QSPI™ and Microwire™ devices without external logic. Aserial strobe output allows direct connection to TMS320-family digital signal processors. The MAX146/MAX147use either the internal clock or an external serial-interface clock to perform successive-approximation analog-to digital conversions.

The MAX146 has an internal 2.5V reference, while the MAX147 requires an external reference. Both parts havea reference-buffer amplifier with a ±1.5% voltage- adjustment range.

These devices provide a hard-wired SHDNpin and asoftware-selectable power-down, and can be pro-grammed to automatically shut down at the end of a conversion. Accessing the serial interface automatically powers up the MAX146/MAX147, and the quick turn-on time allows them to be shut down between all conver-sions. This technique can cut supply current to under 60µA at reduced sampling rates.

The MAX146/MAX147 are available in 20-pin DIP and SSOP packages.For 4-channel versions of these devices, see the MAX1246/MAX1247 data sheet.