Features: ` Programmable Amplification, Calibration, Linearization, and Temperature Compensation
` Two Differential or Four Single-Ended Sensor Input Channels
` Accommodates Sensor Output Sensitivities from 1mV/V to 1V/V
` Two DAC/PWM Output Signal Channels
` 420mA Output Capability
` 4kB of FLASH Memory for Code and Coefficients
` 128 Bytes of FLASH Memory for User Information
` Integrated Temperature Sensor
` Flexible Dual Op-Amp Blocks
` Programmable Sensor Input Gain and Offset
` Programmable Sensor Sampling Rate and Resolution
` Programmable Current Excitation Source for Bridge Sensors
` Buffered 1.25V Output Reference
` No External Trim Components RequiredApplication·Pressure Sensor Signal Conditioning
·Weight Measurement Systems
·Thermocouple and RTD Linearization
·Transducers and Transmitters
·Process Indicators
·Calibrators and Controllers
·GMR and MR Magnetic Direction SensorsPinout
SpecificationsVDD - VSS...............................................................-0.3V to +6.0V
All Other Pins to VSS....................................-0.3V to (VDD + 0.3V)
Continuous Power Dissipation (TA = +70°C)
28-Pin SSOP (derate 9.5mW/°C above +70°C) ............762mW
Operating Temperature Ranges (TMIN to TMAX)
MAX1463CAI .......................................................0°C to +70°C
MAX1463C/W.......................................................0°C to +70°C
MAX1463EAI.....................................................-40°C to +85°C
MAX1463AAI ..................................................-40°C to +125°C
Junction Temperature.....................................................+150°C
Storage Temperature Range .........................-65°C to +150°C
Lead Temperature (soldering, 10s) .............................. +300°CDescriptionThe MAX1463CAI is a highly integrated, low-power, twochannel sensor signal processor optimized for industrial and process control applications such as pressure sensing and compensation, RTD and thermal-couple linearization, weight sensing and classification, and remote process monitoring with limit indication.
The MAX1463CAI accommodates sensors with outputs ranging from 1mV/V to 1V/V and supports both programmable current and voltage sensor excitation. The MAX1463 provides amplification, calibration, signal linearization, and temperature compensation that enable an overall performance approaching the inherent repeatability of the sensor without requiring any external trim components.
Two 16-bit voltage output DACs and two 12-bit PWMs can be used to indicate each of the temperature-compensated sensor signals independently, as a sum or difference signal, or user-defined relationship between each signal and temperature. Uncommitted op amps are available for buffering the DAC outputs, driving heavier external loads, or providing additional gain and filtering.
The MAX1463CAI incorporates a 16-bit CPU, user-programmable 4kB of FLASH program memory, 128 bytes of FLASH user information, one 16-bit ADC, two 16-bit DACs, two 12-bit PWM digital outputs, four rail-to-rail op amps, one SPI™-compatible interface, two GPIOs, and one on-chip temperature sensor.
The MAX1463CAI operates from a single 5.0V supply and is packaged for automotive, industrial, and commercial temperature ranges in a 28-pin SSOP package.
MAX1463CAI Data Sheet
