MAX13014

V_CC.........................................................................-0.3V to +4V
V_L............................................................................-0.3V to +4V
I/O V_{CC_}....................................................-0.3V to (V_CC + 0.3V)
I/O V_{L_} ........................................................-0.3V to (V_L + 0.3V)
EN, EN.........................................................-0.3V to (V_L + 0.3V)
Short-Circuit Duration I/O V_{L_},
I/O V_{CC_} to GND ....................................................Continuous
Continuous Power Dissipation (T_A = +70°C)
6-Pin SC70 (derate 3.1mW/°C above +70°C)..............245mW
6-Bump UCSP (derate 3.9mW/°C above +70°C).........308mW
8-Bump UCSP (derate 4.7mW/°C above +70°C).........379mW
8-Pin SOT23 (derate 9.1mW/°C above +70°C)............727mW
12-Bump UCSP (derate 6.5mW/°C above +70°C) ...518.8mW
14-Pin TSSOP (derate 9.1mW/°C above +70°C) .........727mW
Operating Temperature Range .......................-40°C to +85°C
Junction Temperature....................................................+150°C
Storage Temperature Range .........................-65°C to +150°C
Lead Temperature (soldering, 10s) ...............................+300°C

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

The MAX13013/MAX13014/MAX3023 single-/dual-/quadlevel translators provide the level shifting necessary to allow 100Mbps data transfer in a multivoltage system. Externally applied voltages, V_CC and V_L, set the logic levels on either side of the device. Logic signals present on the V_L side of the device appear as a higher voltage logic signal on the V_CC side of the device, and viceversa.

The MAX13013 single-, the MAX13014 dual-, and the MAX3023 (UCSP™ package) quad-level translators feature an enable (EN) input. The MAX3023 (TSSOP package) quad-level translator features EN and EN inputs. When disabled, each device places all inputs/outputs on both sides in tri-state and reduces the V_CC supply current to 0.03A, and the V_L supply current to 0.1A. These devices operate at a guaranteed 100Mbps data rate for V_L > 1.8V.

The MAX13013/MAX13014/MAX3023 accept a +1.65V to +3.6V V_CC voltage and a +1.2V to (V_CC - 0.4V) VL voltage, making them ideal for data transfer between low-voltage ASICs/programmable logic devices (PLDs) and higher voltage systems. The MAX13013 is available in 3 x 2 UCSP and 6-pin SC70 packages. The MAX13014 is available in 3 x 3 UCSP and 8-pin SOT23 packages. The MAX3023 is available in 4 x 3 UCSP and 14-pin TSSOP packages. All devices operate over the extended -40°C to +85°C temperature range.