Features: ♦ Direct IF Sampling Up to 400MHz
♦ Excellent Dynamic Performance 74.0dB/71dB SNR at fIN = 3MHz/175MHz 90.6dBc/80.7dBc SFDR at fIN = 3MHz/175MHz
♦ Low Noise Floor: -76dBFS
♦ 3.3V Low-Power Operation 337mW (Single-Ended Clock Mode) 363mW (Differential Clock Mode) 150µW (Power-Down Mode)
♦ Fully Differential or Single-Ended Analog Input
♦ Adjustable Full-Scale Analog Input Range: ±0.35Vto ±1.10V
♦ Common-Mode Reference
♦ CMOS-Compatible Outputs in Two's Complementor Gray Code
♦ Data-Valid Indicator Simplifies Digital Interface
♦ Data Out-of-Range Indicator
♦ Miniature, 40-Pin Thin QFN Package with ExposedPaddle
♦ Evaluation Kit Available (Order MAX12555EVKIT)
ApplicationIF and Baseband Communication Receivers Cellular, Point-to-Point Microwave, HFC, WLAN
Ultrasound and Medical Imaging
Portable Instrumentation
Low-Power Data Acquisition
Specifications
| VDD to GND...........................................................-0.3V to +3.6V |
| OVDD to GND........-0.3V to the lower of (VDD + 0.3V) and +3.6V |
| INP, INN to GND ...-0.3V to the lower of (VDD + 0.3V) and +3.6V |
| REFIN, REFOUT, REFP, REFN, COM to GND................-0.3V to the lower of (VDD + 0.3V) and +3.6V |
| CLKP, CLKN, CLKTYP, GT,DCE, PD to GND ........-0.3V to the lower of (VDD + 0.3V) and +3.6V |
| D13D0, DAV, DOR to GND....................-0.3V to (OVDD + 0.3V) |
| Continuous Power Dissipation (TA = +70°C) |
| 40-Pin Thin QFN 6mm x 6mm x 0.8mm |
| (derated 26.3mW/°C above +70°C)........................2105.3mW |
| Operating Temperature Range ...........................-40°C to +85°C |
| Junction Temperature......................................................+150°C |
| Storage Temperature Range .............................-65°C to +150°C |
| Lead Temperature (soldering 10s) ..................................+300°C |
DescriptionThe MAX12553 is a 3.3V, 14-bit, 65Msps analog-to-digital converter (ADC) featuring a fully differential wideband track-and-hold (T/H) input amplifier, driving a low-noise internal quantizer. The analog input stage accepts singleended or differential signals. The MAX12553 is optimized for low-power, small size, and high dynamic performance. Excellent dynamic performance is maintained from baseband to input frequencies of 175MHz and beyond, making the MAX12553 ideal for intermediatefrequency (IF) sampling applications.
Powered from a single 3.15V to 3.60V supply, the MAX12553 consumes only 363mW while delivering a typical signal-to-noise (SNR) performance of 71dB at an input frequency of 175MHz. In addition to low operating power, the MAX12553 features a 150µW powerdown mode to conserve power during idle periods.
A flexible reference structure allows the MAX12553 to use the internal 2.048V bandgap reference or accept an externally applied reference. The reference structure allows the full-scale analog input range to be adjusted from ±0.35V to ±1.10V. The MAX12553 provides a common- mode reference to simplify design and reduce external component count in differential analog input circuits.
The MAX12553 supports both a single-ended and differential input clock drive. Wide variations in the clock duty cycle are compensated with the ADC's internal duty-cycle equalizer (DCE).
ADC conversion results are available through a 14-bit, parallel, CMOS-compatible output bus. The digital output format is pin selectable to be either two's complement or Gray code. A data-valid indicator eliminates external components that are normally required for reliable digital interfacing. A separate digital power input accepts a wide 1.7V to 3.6V supply, allowing the
MAX12553 to interface with various logic levels.
The MAX12553 is available in a 6mm x 6mm x 0.8mm, 40-pin thin QFN package with exposed paddle (EP), and is specified for the extended industrial (-40°C to +85°C) temperature range.
See the Pin-Compatible Versions table for a complete family of 14-bit and 12-bit high-speed ADCs.
MAX12553 Data Sheet
