MAX1239

 High-Speed I2C-Compatible Serial Interface
  400kHz Fast Mode
  1.7MHz High-Speed Mode
Single-Supply
  2.7V to 3.6V (MAX1237/MAX1239)
  4.5V to 5.5V (MAX1236/MAX1238)
Internal Reference
  2.048V (MAX1237/MAX1239)
  4.096V (MAX1236/MAX1238)
 External Reference: 1V to VDD
Internal Clock
4-Channel Single-Ended or 2-Channel Fully Differential (MAX1236/MAX1237)
12-Channel Single-Ended or 6-Channel Fully Differential (MAX1238/MAX1239)
Internal FIFO with Channel-Scan Mode
Low Power
  670µA at 94.4ksps
  230µA at 40ksps
  60µA at 10ksps
  6µA at 1ksps
  0.5µA in Power-Down Mode
Software-Configurable Unipolar/Bipolar
Small Packages
  8-Pin µMAX (MAX1236/MAX1237)
  16-Pin QSOP (MAX1238/MAX1239)

Hand-Held Portable Applications
Medical Instruments
Battery-Powered Test Equipment
Solar-Powered Remote Systems
Received-Signal-Strength Indicators
System Supervision

The MAX1236MAX1239 low-power, 12-bit, multichannel analog-to-digital converters (ADCs) feature internal track/hold (T/H), voltage reference, clock, and an I2C-compatible 2-wire serial interface. These devices operate from a single supply of 2.7V to 3.6V (MAX1237/ MAX1239) or 4.5V to 5.5V (MAX1236/MAX1238) and require only 670µA at the maximum sampling rate of 94.4ksps. Supply current falls below 230µA for sampling rates under 46ksps. AutoShutdown™ powers down the devices between conversions, reducing supply current to less than 1µA at low throughput rates. The MAX1236/MAX1237 have four analog input channels each, while the MAX1238/MAX1239 have 12 analog input channels each. The fully differential analog inputs are software configurable for unipolar or bipolar, and single-ended or differential operation. The full-scale analog input range is determined by the internal reference or by an externally applied reference voltage ranging from 1V to VDD. The devices feature a 2.048V internal reference and the MAX1236/MAX1238 feature a 4.096V internal reference.

The MAX1236/MAX1237 are available in an 8-pin µMAX package. The MAX1238/MAX1239 are available in a 16- pin QSOP package. The MAX1236MAX1239 are guaranteed over the extended temperature range (-40°C to +85°C). For pin-compatible 10-bit parts, refer to the MAX1136MAX1139 data sheet. For pin-compatible 8-bit parts, refer to the MAX1036MAX1039 data sheet.