MAX1196

 Single 2.7V to 3.6V Operation
Excellent Dynamic Performance 48.4dB/44.7dB SINAD at fIN = 20MHz/200MHz 68.9dB/53dBc SFDR at fIN = 20MHz/200MHz
-72dB Interchannel Crosstalk at fIN = 20MHz
Low Power 87mW (Normal Operation) 9mW (Sleep Mode) 0.3µW (Shutdown Mode)
0.05dB Gain and ±0.05° Phase Matching
Wide ±1VP-P Differential Analog Input Voltage Range
400MHz -3dB Input Bandwidth
On-Chip 2.048V Precision Bandgap Reference
User-Selectable Output Format-Two's Complement or Offset Binary
 Pin-Compatible 8-Bit and 10-Bit Upgrades Available

V_DD, OV_DD to GND .............................................. -0.3V to +3.6V
OGND to GND...................................................... -0.3V to +0.3V
INA+, INA-, INB+, INB- to GND ...............................-0.3V to V_DD
REFIN, REFOUT, REFP, REFN, COM, CLK to GND.....-0.3V to (V_DD + 0.3V)
OE, PD, SLEEP, T/B, D7A/BD0A/B, A/B to OGND...-0.3V to (OV_DD + 0.3V)
Continuous Power Dissipation (TA = +70°C)
48-Pin TQFP (derate 12.5mW/°C above +70°C)........1000mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C

The MAX1196 is a 3V, dual 8-bit analog-to-digital converter (ADC) featuring fully differential wideband trackand- hold (T/H) inputs, driving two ADCs. The MAX1196 is optimized for low power, small size, and high-dynamic performance for applications in imaging, instrumentation, and digital communications. This ADC operates from a single 2.7V to 3.6V supply, consuming only 87mW while delivering a typical signal-to-noise and distortion (SINAD) of 48.4dB at an input frequency of 20MHz and a sampling rate of 40Msps. The T/H driven input stages incorporate 400MHz (-3dB) input amplifiers. The converters can also be operated with singleended inputs. In addition to low operating power, it features a 3mA sleep mode as well as a 0.1µA power-down mode to conserve power during idle periods.

An internal 2.048V precision bandgap reference sets the full-scale range of the ADC. A flexible reference structure allows the use of this internal or an externally applied reference, if desired for applications requiring increased accuracy or a different input voltage range.

The MAX1196 features parallel, multiplexed, CMOScompatible three-state outputs. The digital output format can be set to two's complement or straight offset binary through a single control pin. The device provides for a separate output power supply of 1.7V to 3.6V for flexible interfacing. The MAX1196 is available in a 7mm * 7mm, 48-pin TQFP package, and is specified for the extended industrial (-40°C to +85°C) temperature range.

Pin-compatible, nonmultiplexed higher speed versions of the device are also available. Refer to the MAX1198 data sheet for 100Msps, the MAX1197 data sheet for 60Msps, and the MAX1195 data sheet for 40Msps.

For a 10-bit, pin-compatible upgrade, refer to the MAX1186 data sheet. With the N.C. pins of the MAX1196 internally pulled down to ground, this ADC becomes a drop-in replacement for the MAX1186.