MAX117EVKIT-DIP

The features of MAX117EVKIT-DIP can be summarized as:(1)+3v operation;(2)fully assembled and tested;(3)on-board oscillator generates timing signals;(4)led display of conversion results;(5)low-power shutdown mode.

The jumper configuration for continuous-conversion operation of the MAX117EVKIT-DIP can be summarized as:(1):the jumper is JU1,the connection is 1&2,the function is connects REF- to the drain of N1 (see the shutdown section);(2):the jumper is JU2,the connection is open,the function is sets the MAX117 for READ JU2 open mode operation (MODE = low);(3):the jumper is JU3,the connection is shorted,the function is enables the LED display;(4):the jumper is JU4,the connection is 2&3,the function is connects the CS pin to the on-board oscillator;(5):the jumper is JU5,the connection is shorted,the function is connects the MAX117's VDD pin to the on-board EV kit's VDD pad;(6):the jumper is JU6,the connection is shorted,the function is connects the RD pin to the on-board oscillator;(7):the jumper is JU7,the connection is shorted,the function is connects the MAX117's REF+ pin to VDD;(8):the jumper is JU8,the connection is shorted,the function is connects a pull-up resistor to the WR/RDY pin.