MAX11606

The max11606/max11607 are available in an 8-pin max package. the max11608-max11611 are available in a 16-pin qsop package. the max11606max11611 are guaranteed over the extended temperature range (-40°c to +85°c). for pin-compatible 12-bit parts, refer to the max11612-max11617 data sheet. for pin-compatible 8-bit parts, refer to the max11600max11605 data sheet. The MAX11606MAX11611 low-power, 10-bit, multichannel analog-to-digital converters (ADCs)feature internal track/hold (T/H), voltage reference, clock, and an I2C-compatible 2-wire serial interface. Supply current falls below 230A for sampling rates under 46ksps. These devices operate from a single supply of 2.7V to 3.6V (MAX11607/ MAX11609/MAX11611)or 4.5V to 5.5V (MAX11606/ MAX11608/MAX11610)and require only 670A at the maximum sampling rate of 94.4ksps. AutoShutdownTM powers down the devices between conversions, reducing supply current to less than 1A at low throughput rates. The MAX11606/MAX11607 have 4 analog input channels each, the MAX11608/MAX11609 have 8 analog input channels each, while the MAX11610/MAX11611 have 12 analog input channels each. The fully differential analog inputs are software configurable for unipolar or bipolar, and single ended or differential operation. The MAX11607/ MAX11609/MAX11611 feature a 2.048V internal reference and the MAX11606/MAX11608/MAX11610 feature a 4.096V internal reference. The full-scale analog input range is determined by the internal reference or by an externally applied reference voltage ranging from 1V to VDD.

The features of MAX11606 can be summarized as (1)high-speed I2C-compatible serial interface 400kHz Fast Mode / 1.7MHz high-speed mode; (2)single-supply 2.7V to 3.6V (MAX11607/MAX11609/MAX11611)/ 4.5V to 5.5V; (3)internal reference 2.048V /4.096V; (4)external reference: 1V to VDD; (5)internal clock; (6)4-channel single-ended or 2-channel fully differential; (7)8-channel single-ended or 4-channel fully differential (MAX11608/MAX11609); (8)12-channel single-ended or 6-channel fully differential (MAX11610/MAX11611); (9)internal FIFO with channel-scan mode; (10)low power 670A at 94.4ksps / 230A at 40ksps / 60A at 10ksps / 6A at 1ksps / 0.5A in power-down mode; (11)software-configurable unipolar/bipolar; (12)small packages 8-pin MAX (MAX11606/MAX11607)/ 16-pin QSOP.

The absolute maximum ratings of MAX11606 are (1)VDD to GND: -0.3V to +6V; (2)AIN0AIN11, REF to GND: -0.3V to the lower of (VDD + 0.3V)and 6V; (3)SDA, SCL to GND: -0.3V to +6V; (4)maximum current into any pin: ±50mA; (5)continuous power dissipation (TA = +70°C)8-pin MAX (derate 5.9mW/°C above +70°C): 470.6mW / 16-pin QSOP (derate 8.3mW/°C above +70°C): 666.7mW; (6)operating temperature range: -40°C to +85°C; (7)junction temperature: +150°C; (8)storage temperature range: -60°C to +150°C; (9)lead temperature (soldering, 10s): +300°C; (10)soldering temperature: +260°C.