MAX115

© Single +5V Supply Operation
© 4 (MAX114) or 8 (MAX118) Analog Input Channels
© Low Power: 40mW (operating mode) 5µW (power-down mode)
© Total Unadjusted Error ²1LSB
© Fast Conversion Time: 660ns per Channel
© No External Clock Required
© Internal Track/Hold
© 1MHz Full-Power Bandwidth
© Internally Connected 8th Channel Monitors Reference Voltage (MAX118)

High-Speed DSP
Remote Data Acquisition
Portable Equipment
Communications Systems

The MAX115 are microprocessor-compatible, 8-bit, 4-channel and 8-channel analog-to-digital converters
(ADCs). They operate from a single +5V supply and use a half-flash technique to achieve a 660ns conversion time (1Msps). A power-down (PWRDN) pin reduces current consumption typically to 1µA. The devices return from power-down mode to normal operating mode in less than 200ns, allowing large supplycurrent reductions in burst-mode applications (in burst mode, the ADC wakes up from a low-power state at specified intervals to sample the analog input signals). Both converters include a track/hold, enabling the ADC to digitize fast analog signals.

Microprocessor (µP) interfaces are simplified because the ADC can appear as a memory location or I/O port without external interface logic. The data outputs use latched, three-state buffer circuitry for direct connection to an 8-bit parallel µP data bus or system input port. The MAX114/MAX118 input/reference configuration enables
ratiometric operation.

The 4-channel MAX115 is available in a 24-pin DIP or SSOP. The 8-channel MAX118 is available in a 28-pin DIP or SSOP. For +3V applications, refer to the MAX113/MAX117 data sheet.