M62008FP

 `Bi-CMOS process realizes a configuration of low current dissipating circuits.
                  Circuit current
                       Icc=5A(Typ.,normal mode,Vcc=5.0V)
                       Icc=1A(Typ.,backup mode,Vcc=2.5V)
•Two-step detection of supply voltage
                 Detection voltage in normal mode (2 types)
                     Vs=4.45V/4.25V(Typ.)
                 Detection voltage in backup mode
                     VBATT=2.15V(Typ.)
•Two outputs
                 Reset output (RESET):Output of compulsive reset signal
                 Interruption output(INT):Output of interruption signal
•Two types of output forms:CMOS and open drain
•Two types of interruption output (INT) signals
                 Pulse type (M62001~M62004)
                 Hold type (M62005~M62008)
•Two types of outline packages
                 5-pin plastic SIP (single in-line package)
                 8-pin plastic SOP (mini flat package)
•Output based on RAM backup mode (See the timing chart.)

Prevention of malfunction of microcomputer systems in electronic,equipment such as OA equipment, industrial
equipment,and home-use electronic appliances.

The M62001~8 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in the
power supply to a microcomputer system in order to reset or release the microcomputer system.

The M62001~8 carry out voltage detection in 2 steps and have 2 output pins.As Bi-CMOS process and low power
dissipating circuits are employed,they output optimum signals through each output pin to a system that requires RAM
backup, As output signals,interruption(INT) and compulsive reset(RESET) signals are available.The interruption
signal(INT) is used to alter the microcomputer from normal mode to backup mode and vice versa. these output signals are classified into pulse type(M62001~M62004) and hold type (M62005~M62008).