PinoutSpecifications Symbol Parameter Value Unit VCC Supply Voltage -0.5 to +7 V VI DC Input Voltage -0.5 to VCC + 0.5 V VO DC Output Voltage -0.5 to VCC + 0.5 V IIK DC Input Diode Current ± 20 mA IOK DC Output Diode Current ± 20 mA IO DC Output Source Si...
M54HC299: PinoutSpecifications Symbol Parameter Value Unit VCC Supply Voltage -0.5 to +7 V VI DC Input Voltage -0.5 to VCC + 0.5 V VO DC Output Voltage -0.5 to VCC + 0.5 V IIK D...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Value | Unit |
VCC | Supply Voltage | -0.5 to +7 | V |
VI | DC Input Voltage | -0.5 to VCC + 0.5 | V |
VO | DC Output Voltage | -0.5 to VCC + 0.5 | V |
IIK | DC Input Diode Current | ± 20 | mA |
IOK | DC Output Diode Current | ± 20 | mA |
IO | DC Output Source Sink Current Per Output Pin (QA -QH) | ± 35 | mA |
IO | DC Output Source Sink Current Per Output Pin (QA' -QH') | ±235 | mA |
ICC or IGND | DC VCC or Ground Current | ± 70 | mA |
PD | Power Dissipation | 500(*) | mW |
Tstg | Storage Temperature | -65 to +150 | °C |
TL | Lead Temperature (10 sec) | 300 | °C |
The M54/74HC299/323 are high speed CMOS 8- BIT PIPO SHIFT REGISTERS (3-STATE) fabricated with silicon gate C2MOS technology.
M54/74HC299/323 achieve the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power consumption.
These devices M54/74HC299/323 have four modes (HOLD, SHIFT LEFT,SHIFT RIGHTand LOADDATA). Each mode is chosen by two function select inputs (S0, S1). When one or both enable inputs, (G1, G2) are high, the eight input/output terminals are in the highimpedance state ; however sequential operation or clearing of the register is not affected.
M54/74HC299/323 Clear function on the HC299 is asynchronous to CLOCK,while the HC323 is cleared synchronous to clock.
M54/74HC299/323 All inputs are equipped with protection circuits against static discharge and transient excess voltage.